Articles

Nastassia is a dedicated Senior IT Business Analyst with both technical and non-technical expertise in the FinTech, EdTech and E-Commerce domains. She holds a Master’s degree in Informatics and is certified by Scrum.org as PSPO I. Nastassia has participated in several scientific conferences related to Computer Science and IT Project Management.

• Integrating User-Centric Design in Business Analysis

Nuno Santos is currently a Senior Business Analyst at Natixis Portugal. He holds a PhD in Technologies and Information Systems, and is also certified from Agile Alliance as CSPO, and from the IIBA as CCBA, AAC and POA. He has also written articles about requirements, agility and product ownership at RE Magazine, BA Digest, Analyst Catalyst, Medium, and in several scientific conferences.

• Requirements Elicitation in Modern Product Discovery
• Inputs to requirements engineering in agile projects

Prof. Dr. Salinesi is an active academic who teaches topics in relation with software design such as Requirements Engineering, and Software Product Lines. He was involved in many funded research projects (FP4, FP5, H2020, ANR) and was the leader for collaborations and consultancy works for various companies such as France Télécom, SNCF, Renault, EDF or REXEL). He has been General Chair of SPLC, CAiSE, REFSQ international conferences, and was Organizing Chair of the 13th IEEE International Conference on Requirements Engineering.

At IREB, Prof Salinesi has acted for 2 mandates as Second Chair of the Executive Committee. He is now Full Member, member of the Editorial Board, and WG Member.

• Conversation with an Artificial Intelligence

Thorsten von Ramsch is Director Engineering at QAULITEST Group. He is an IREB Certified Requirements Engineer, ISTQB Certified Tester Full Advanced Level, ASQF Project Manager, Professional Scrum Master and iNTCCM Certified Professional for Configuration Management. His focus is on the banking and insurance sector, which he advises in the areas of requirements elicitation, test management and test analysis.

• Classical requirements and test analysis a discontinued model?

For more than twenty years, Rainer Grau has accompanied companies on their way enterprise agility. He supports companies in their efforts to continuously develop and create sustainable value for customers and employees. For him, it is particularly exciting to find out which methods, techniques and approaches are suitable for scaling agility and building the right product and the right service for the customer. Business analysis and requirements engineering are two essential disciplines in this context, which also generate high value in an agile setup - even if perhaps lived completely differently compared to a classic project approach.

Rainer's background of experience in business agility is based on his consulting work with companies from various industries. Stages of his professional life include Distinguished Consultant and Partner at Zühlke Engineering, Head of Business Development at digitec Galaxus, responsible for courses at universities of applied sciences on the topic of agility, founder of the Swiss Agile Leaders Circle, founder of Denkplan Verein and active involvement in communities around agility, business analysis and requirements engineering.

If there is still time left, Rainer Grau likes to spend it with his family, doing sports, playing his guitar and reading novels.

• Mission Possible
• Innovation Arena

Gil Regev has been a researcher at EPFL since 1997 in the fields of enterprise information systems, requirements engineering, change management and knowledge management. Since 2008 he is also manager and consultant at Itecor, a boutique consultancy firm. Previously Gil developed software for computer peripherals at Logitech, in Switzerland and California.

• A General Systems Thinking Perspective on the CPRE

Alain Wegmann is a full professor at the School of Computer and Communication Sciences, EPFL, Switzerland. He worked 14 years for Logitech (Switzerland, Taiwan, US) in positions ranging from software developer, IS manager, manufacturing engineering to VP of engineering and OEM marketing before joining the EPFL in 1997. His teaching, consulting and research are in the fields of enterprise architecture, requirements engineering and service engineering.

• A General Systems Thinking Perspective on the CPRE

Olivier Hayard has been a consultant and in charge of IT and Knowledge Management at Itecor, a boutique consultancy firm, since 1993. Olivier’s main interests are business analysis and requirements management, as practitioner, trainer and researcher.

• A General Systems Thinking Perspective on the CPRE

Project manager since 2008, certified Scrum Product Owner, Agile Project Manager, with foundations of PRINCE2. Over six years of experience as a UX designer and researcher. Worked in digital agencies as a digital project manager, then switched to the client's side. Head of Product in iTaxi, then in Pergamin (e-signature). Worked also for libraries and museums in Poland to help improve the accessibility of digital products.

Awarded by Innovation Ad Award for the prototype for Sensodyne and by nomination in Mobile Trends for the mobile app for drivers. An author of articles about product management, user experience, and accessibility.

• The Potential of User Tests for Requirements Engineering

Luisa Mich is an Associate Professor of Computer Science at the University of Trento, Italy. Her research interests include requirements engineering, creativity and web strategies. She is an author of more than 150 papers.
 

• Interview with John Mylopoulos
• Requirements Elicitation (ReqElic) in My Company

David Gilbert has worked in various operational and strategic Digital Design roles since 2007. Previously, he completed his studies as Diploma Mediamanager at the Wiesbaden University of Applied Sciences.

Until 2015, he worked for various design agencies such as Scholz & Volkmer, Pixelpark, Mutabor or SinnerSchrader. The projects he has worked in have received over 25 international and national design awards. - Since 2015 he is working in the IT department of the Deutsche Bahn Group, where he holds the role of Chief Architect User Experience at the intersection of classic system-oriented and user-oriented software conception.

From 2011 - 2016, he was a lecturer in UX Design at the RheinMain University of Applied Sciences, and has published various contributions to the topics of strategic UX design and digital design.

In addition to his engagement within the "Digital Design" working group, he is chairing the Bitkom "Digital Design" working group as well as he is a member of the "Designforum Digital Experience" of the German Design Council.

• Mastering Business Requirements

Dirk Röder has been working in software engineering since 1992. At DB Systel GmbH, he has been chief software architect since 2007, taking care of the employees involved in IT conception.

Since 2010, he has played a leading role in setting up and further developing the internal training program for the conceptual design of software. He has been driving the integration of UX design and classic software engineering since 2015. He is currently working on the conversion of concept work to agile implementation and new production models such as DevOps.

• Mastering Business Requirements

Rana Siadati is currently a PhD student in Software Requirements Engineering and also a visiting lecturer by the School of Computer Science at the University of Hertfordshire. Alongside these roles, Rana has many years of academic and industrial experience, also at managerial level, gained in the UK and abroad.

• Learning from history: The case of Software Requirements Engineering

Paul Wernick is a Senior Lecturer in Computer Science at the University of Hertfordshire. Dr Wernick has taken leading roles in the ProSim series of software process simulation workshops, and the IEEE Workshop on Software Evolvability. Dr Wernick’s current research interests cover the high-level human environment within which software processes occur and their simulation, and computer security.

• Learning from history: The case of Software Requirements Engineering

Vito Veneziano is a Senior Lecturer in Computer Science at the University of Hertfordshire, and his interests range from software engineering, HCI, requirements analysis and system modelling, to how software systems impact on organisations. Previously Dr Veneziano worked in IT and project management, business application development, software design and consultancy.

• Learning from history: The case of Software Requirements Engineering

Jason Hansen obtained a BS in Chemical Engineering from Michigan Tech. He left the work force in 2005 to focus on raising an adopted special needs daughter. In 2015, he decided to return to school and obtained his AAAS in Network Admin. He is working as a tutor at GRCC while pursuing a Master’s Degree in Computer Software Engineering at GVSU.

• Challenges in the elicitation and determination of precise requirements from animal stakeholders

Thijmen works as IT architect at Kommuninvest acting as technical lead for its digitalization initiative and growing CI/CD and Agile practice in the company. His work on the mini-QAW started in his role as researcher at ABB, where he worked on software architectures with colleagues around the globe. He authored publications at leading international software conferences, receiving two best paper awards. Thijmen graduated cum-laude in software engineering from VU University in the Netherlands and Malardalen University in Sweden.

• Discover Quality Requirements with the Mini-QAW

Michael Keeling is a software engineer at LendingHome and the author of Design It! From Programmer to Software Architect. In his career so far, he has worked on a variety of interesting software systems including IBM Watson, enterprise search applications, financial platforms, and Navy combat systems. Michael has a master’s degree in software engineering from Carnegie Mellon University and a bachelor’s degree in computer science from the College of William and Mary. Contact him via Twitter @michaelkeeling or his website, https://www.neverletdown.net

• Discover Quality Requirements with the Mini-QAW

Will Chaparro is a software development manager in IBM’s Watson Group. He spent over 5 years designing and building complex enterprise search solutions as a managing consultant. Prior to IBM he spent 11 years as a software engineer. He has a BS in Computer Science from the University of Pittsburgh.

• Discover Quality Requirements with the Mini-QAW

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests

Dr.-Ing. Birgit Demuth has over 20 years experience as researcher and educator in software engineering.
Amongst other lectures, she teaches students in requirements engineering.

Her interests are how to apply model-based techniques in the continuous software life cycle.
In a large-scale software project course, she coaches students and student tutors to elicit and model (often real)
user requirements before they start to implement.

• Tracing Change Requests

Guilherme Siqueira Simões works on FATTO Software Consulting (www.fattocs.com). He is author of a book on Function Points and of another book on Requirements Engineering, and has trained thousands of people from Latin America on these subjects. He has more than 20 years of experience on software projects. He is graduated on computer science and business management. He is a certified professional on function points by IFPUG and COSMIC, requirements engineering by IREB and PMP by PMI.

• Functional Requirements and their levels of granularity

He has been a function point analysis user since 1991, instructor since 1993, certified function points specialists (CFPS) by IFPUG since 1996 and by COSMIC since 2012. In both certifications, was among the first Brazilians to hold them. In 2001, co-authored the book “APF: Medição, Estimativas e Gerenciamento de Projetos de Software”, currently in its 13th edition, with over 13,000 copies sold and the main reference book on the subject in Brazil. In 2016 coauthored the book "RE: Software Orientado ao Negocio” and became a certified professional for requirements engineering – foundation level – by the IREB.

• Functional Requirements and their levels of granularity

Albert Tort is the Research&Innovation Solutions Lead in Sogeti Spain. During the last years, he has been working as Quality Assurance and Software Control & Testing specialist in several projects for customers in different sectors (banking, airlines, insurance, procurement, etc.). Furthermore, he has been the lead of research&innovation projects developed at Sogeti. He was the winner of the “Capgemini-Sogeti Testing Innovation Awards 2015” for the submission of the best individual entry "Recover: Reverse Modeling and Up-To-Date Evolution of Functional Requirements in Alignment with Tests. He is also a member of the SogetiLabs community.

Previously, he served as a professor and researcher at the Services and Information Systems Engineering Department of the Universitat Politècnica de Catalunya-Barcelona Tech. As a member of the Information Modeling and Processing (MPI) research group, he focused his research on conceptual modeling, software engineering methodologies, OMG standards, knowledge management, requirements engineering, service science, semantic web and software quality assurance. Currently, he is also the coordinator of the postgraduate degree in Software Quality Assurance of the School of Professional & Executive Development of the Technical University Of Catalunya (BarcelonaTech).

He obtained his Computer Science degree in 2008 and he received his M.Sc. in Computing in 2009. In 2012 he presented the PhD thesis “Testing and Test-Driven Development of Conceptual Schemas”. He is the author of several publications in software engineering journals and conferences.

• KCycle: Knowledge-Based & Agile Software Quality Assurance
• The Recover Approach

Karol Frühauf is co-founder of INFOGEM AG in Switzerland, since 1987 consulting in the field of software project and quality management (http://www.infogem.ch). He worked 12 years for BBC Brown Boveri & Cie and helped since 1987 many companies to improve their processes and products. He co-authored two books and is a frequent speaker, tutor and teacher in the field of software engineering. His main interests are test and quality management and requirements engineering.
He initiated and directs the "Bridge Guard Art / Science Residence Centre" in Štúrovo, Slovakia (http://www.bridgeguard.org).

• Sharing My Doubts on the Focus of Requirements
• Sharing My Doubts on Goals and Requirements
• Sharing My Doubts on Shall / Should / Will etc.
• Sharing My Doubts on Acceptance Criteria

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

Martin Tate is an IT consultant who has now personally run or rescued 52 projects to select off-the-shelf solutions, interviewed over 725 people to capture the requirements for selections and appraised over 1,000 candidate solutions. A ‘poacher turned gamekeeper’, he formerly worked for an IT provider and was trained to sell software. BCS, The Chartered Institute for IT, made him a Chartered Fellow for eminence in evaluating software and recently published his book, a practitioner guide to procuring off-the-shelf IT.

• IT Requirements when Buying, not Making

Christoph Wolf works for more than 15 years as Requirements Engineer, Business Analyst, Project Manager and Quality Assurance Manager. He has built up a Business Analysis team and led it for several years. Since last year, he is consultant at SwissQ and supports clients in requirements engineering and quality assurance with focus on delivering business value. 

• The Business Analysis Center of Excellence

Stefan Meier is passionate about exploring and experimenting with new Requirements Engineering practices and methodologies. He many years of practical experience as Project Manager, Requirements Engineer  and Agile Coach. He loves talking to different stakeholders and sharpening their ideas and visions to get a crisp and clear understanding of their needs and values. 
He works at SPF Consulting and currently helps customers switching their requirements frameworks from waterfall processes towards agile approaches like Scrum. Additionally he is an conversant trainer for IREB CPRE FL, Visual Facilitation and Agile Requirements.

• Applying IREB RE practices in an agile environment

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

Albert Tort is the Research&Innovation Solutions Lead in Sogeti Spain. During the last years, he has been working as Quality Assurance and Software Control & Testing specialist in several projects for customers in different sectors (banking, airlines, insurance, procurement, etc.). Furthermore, he has been the lead of research&innovation projects developed at Sogeti. He was the winner of the “Capgemini-Sogeti Testing Innovation Awards 2015” for the submission of the best individual entry "Recover: Reverse Modeling and Up-To-Date Evolution of Functional Requirements in Alignment with Tests. He is also a member of the SogetiLabs community.

Previously, he served as a professor and researcher at the Services and Information Systems Engineering Department of the Universitat Politècnica de Catalunya-Barcelona Tech. As a member of the Information Modeling and Processing (MPI) research group, he focused his research on conceptual modeling, software engineering methodologies, OMG standards, knowledge management, requirements engineering, service science, semantic web and software quality assurance. Currently, he is also the coordinator of the postgraduate degree in Software Quality Assurance of the School of Professional & Executive Development of the Technical University Of Catalunya (BarcelonaTech).

He obtained his Computer Science degree in 2008 and he received his M.Sc. in Computing in 2009. In 2012 he presented the PhD thesis “Testing and Test-Driven Development of Conceptual Schemas”. He is the author of several publications in software engineering journals and conferences.

• KCycle: Knowledge-Based & Agile Software Quality Assurance
• The Recover Approach

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

Frank Rabeler is a Business Analyst at T-Systems in Germany, where he specializes in requirements engineering for telecommunications software systems. Previously he worked as a database expert with focus on data modeling. How to design documents, data models etc. in the best readable way? Questions like these have been challenging him over the last 25 years as an IT professional. For 15 years now he has been using Information Mapping as part of his daily work and he appreciates this method as a success factor - especially in RE.

• Readable requirements

Johan Zandhuis is Product manager at SYSQA BV, an organisation specialised in quality assurance in IT. The themes ‘creating value with IT’ and ‘getting grip on IT’ play a constant role when he’s doing the job. “Why are we doing this” is a question he likes to ask. Besides other publications Johan is co-author of the Dutch book ‘Grip op requirements’ based on the IREB syllabus. Also he is one of the initiators for the Dutch translation of the IREB-dictionary and the IREB foundation syllabus. Contact: jzandhuis@sysqa.nl

• Poor requirements?

Dr. Christof Ebert is managing director at Vector Consulting Services. He supports clients around the world to improve product strategy and product development and to manage organizational changes. A trusted advisor for companies around the world, member of industry boards, he lectures at the Universities of Stuttgart and at the Sorbonne in Paris. He authored several books including the popular “Systematic Requirements Engineering”. Contact him at christof.ebert@vector.com

• Cyber Security Requirements Engineering
• Product Management

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests
• Automated Quality Assurance

Dr. Ralph R. Young (CSEP, http://www.ralphyoung.net) has invested his career in assisting individuals, projects, and organizations to improve and helping others to grow. He has a wide diversity of experience, including private sector, Federal Government, local government, military, and oversight of programs. He consults and speaks frequently concerning project management, requirements development and management, and process improvement. Ralph has written a series of five books to date: Effective Requirements Practices (that describes what to do); The Requirements Engineering Handbook (that describes how to perform requirements-related work); Project Requirements: A Guide to Best Practices (which is written for program and project managers, to communicate the importance and value of incorporating good requirements practices); Performance-Based Earned Value (with Paul Solomon), which proposes a change to industry earned value management practices; and How to Save a Failing Project: Chaos to Control (with Steve Brady and Dennis Nagle) that provides guidance and insight based on multiple efforts in changing the direction of failing projects and also for projects that desire to perform well.. Ralph contributed to another book, The 77 Sins of Project Management, written by a large number of contributors selected by the publisher, that describes sins, danger signs, suggested solutions, and tips for 77 aspects of project management – thoughtful, considered advice. Ralph enjoys the outdoors, boating, reading, writing, and family activities, especially six grandchildren. He wants to write another book, concerning leadership. He resides on Kent Island, Maryland USA. He welcomes comments and feedback and can be reached at ryoungrr@aol.com.

• Toward Better RE

Alexander Rachmann advises companies on the linking business and IT. His strong interdisciplinary knowledge of business administration and computer science enables him to work as an ideal Requirements Engineer, Business Analyst, or System Analyst. He has worked in industries such as e-commerce, healthcare, IT security, and software development. He holds a doctorate degree in economics, master's degrees in computer science and information science and a diploma in business computer science.

• Product Owner in Scrum

Jesko Schneider worked as a consultant with a focus on Business Analysis, Requirements Management and Usability Engineering. He built up consulting services for Requirements Engineering and Usability Engineering in an international consulting company. His industry focus lies on telecommunications. He is a well-known trainer for Certified Professional for Requirements Engineering from the IREB. In his role as Requirements Engineer, Business Analyst, System Analyst or Product Owner, he is always the linkage between business and IT. He holds a degree in media informatics.

• Product Owner in Scrum

Frank Engel looks back on over 10 years’ experience in project management and Requirements Engineering. Prior to his time as a Partner of the Anforderungsfabrik, he was responsible for an international consulting company as Unit Manager. Topic of his business unit was Requirements Engineering and Management. His role in projects is Product Owner, Project Manager and Requirements Engineer. He studied business information systems. Always linking business and IT!

• Product Owner in Scrum

Founder of the consulting company “Crescendo Technologies”, Joseph Aracic is a System Engineering Consultant, focusing on requirements management techniques and processes, product line engineering and model driven engineering.

Prior to this, Joseph has been the manager of the Telelogic (Now an IBM Rational brand) French Professional Services team for requirements management and architecture modeling. Joseph has been involved in various system engineering projects (mainly in the defense industry) as consultant/coach in system engineering techniques deployment.

• A key technique

Mats Wessberg holds a Masters degree in mathematics and computer science. He has been active in the IT community since the mid-nineties, initially as a software engineer but mainly as a consultant, often mentoring software projects in requirements engineering and methodology.

In 2006, he co-founded Inceptive, a Sweden based consulting firm specializing in software testing and requirements engineering, and was the company's CEO until 2013. He then founded Metrical, a company dedicated in helping software organizations boost their efficiency through process automation. Mats is currently CEO of Metrical.

• Think Like a Scientist

Erik van Veenendaal (www.erikvanveenendaal.nl) is a leading international consultant and trainer, and a widely recognized expert in the area of software testing and quality management.

He is the founder of Improve Quality Services BV (www.improveqs.nl). He holds the EuroSTAR record, winning the best tutorial award three times! In 2007 he received the European Testing Excellence Award for his contribution to the testing profession over the years. He has been working as a test manager and consultant in various domains for more than 20 years. He has written numerous papers and a number of books, including “Practical Risk-Based Testing: The PRISMA Approach” and “ISTQB Foundations of Software Testing”. He is one of the core developers of the TMap testing methodology and a participant in working parties of the International Requirements Engineering Board (IREB). Erik is also a former part-time senior lecturer at the Eindhoven University of Technology, vice-president of the International Software Testing Qualifications Board (2005–2009) and currently board member of the TMMi Foundation.

You can follow Erik on twitter via @ErikvVeenendaal.

• RE for Testers

Howard Podeswa is a thought leader in the intersection of agile and business analysis. For over twenty years, he has been helping large organizations optimize their analysis and planning practices for agile software development approaches. He has authored a number of books that have become staple references for practitioners, most recently: The Agile Guide to Business Analysis and Planning: From Strategic Plan to Continuous Value Delivery - How Product Owners and Business Analysts (BAs) maximize the value of the product developed by the team, by integrating BA competencies with agile methodologies (Addison-Wesley Professional; 1st edition, 2021). Other works include UML for the IT Business Analyst (2009), and The Business Analyst’s Handbook (2008).

At Noble Inc., he has provided agile and business analysis services to clients worldwide, including the International Standards Organization (ISO), Moody’s, the Mayo Clinic, TELUS, TD Bank, LabCorp, the U.S. Food and Drug Administration (FDA), Mawer Investment Management Ltd., Bell Nexia, and REI Coop. He is currently advising IIBA on its Nimble initiative.

To contact Howard for in-house and public training and coaching services, please email howardpodeswa@nobleinc.ca or find him on LinkedIn @howardpodeswa

• Why Your Agile Organization Needs a High-Performing Requirements Engineering Competency
• The Business Case for Agile Business Analysis
• Five Questions