Articles

Daniel Méndez is an Associate Professor for Software Engineering at the Blekinge Institute of Technology, Sweden and Senior Scientist at fortiss, the research institute of the Free State of Bavaria for software-intensive systems and services. His research is on Empirical Software Engineering with a particular focus on interdisciplinary, qualitative research in Requirements Engineering and its quality improvement. He regularly publishes in various software engineering publications and has occupied several key positions in venues of the empirical software engineering community. He is a member of the ACM, the IEEE Computer Society, and the German association of university professors and lecturers, and he serves as the representative to ISERN, the International Empirical Software Engineering Research Network. Further information is provided at www.mendezfe.org.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Xavier Franch is Professor at the Universitat Politècnica de Barcelona (UPC-BarcelonaTech), Spain. He is Council Member and Full Member of the IREB association. He has published over 200 peer-reviewed papers in conferences and journals, many of them related to requirements engineering. He was Program Co-Chair of the RE’16 and REFSQ’11 conferences, and he belongs to the Editorial Board of the Requirements Engineering Journal (Springer) and Information Software and Technology (IST) journals, among others. He is coordinator of the Q-Rapids project and participates in the OpenReq project, both in the H2020 programme. He organizes workshops concerning requirements engineering for NLP4RE, CrowdRE, JIT-RE and others.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Dr. Sebastian Adam received his Master of Science degree (“German Diplom”) in Computer Science from the Technical University of Kaiserslautern, Germany in 2005 and joined the Fraunhofer Institute for Experimental Software Engineering (IESE), Kaiserslautern, Germany in the same year. Since then, he is working there as a consultant, project leader and researcher for requirements engineering (RE) and has been coordinating and managing several national and international research and industry projects in the area of RE. Since 2011, he is leading the requirements engineering team at Fraunhofer IESE. In 2012, he received his Doctor degree (Dr.-Ing.) from the Technical University of Kaiserslautern. His work expertise and specific interests lie in the integration of requirements engineering with business process management, in lean requirements engineering as well as automatic requirements engineering by social media and mining technologies. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, sebastian.adam@iese.fraunhofer.de

• TORE

Norman Riegel is a Consultant, Project Manager and Researcher for Requirements Engineering at the Fraunhofer Institute for Experimental Software Engineering (IESE), Kaiserslautern, Germany. Je joined Fraunhofer IESE in 2007, after having received his diploma in business informatics with a focus on logistics and industrial management by the University of Mannheim, Germany. He has been consulting industrial companies in finance, insurance, logistics, medical, social media, public and other domains. He is conducting trainings, tutorials and lectures in requirements engineering. In his role as a researcher he is contributing to national and international research projects and is author of more than 20 peer reviewed publications. His research interests include lean requirements engineering, the integration of requirements engineering and business process management, prioritization and decision support. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, norman.riegel@iese.fraunhofer.de

• TORE

Dr. Joerg Doerr is head of the Information Systems division at the Fraunhofer Institute Experimental Software Engineering (IESE) in Kaiserslautern, Germany. Before, he was head of the Requirements and Usability Engineering department. His work areas include all software engineering areas for informations systems, with a special focus on requirements engineering, especially non-functional requirements. He received his master of science and PhD in Computer Science from the University of Kaiserslautern, Germany.  He leads diverse Training, industrial Technology-transfer and Research projects. He is lecturer at the University of Kaiserslautern, author of more than 60 peer reviewed publications and member in many international and national program committees. 2013, he was Co-Chair of the REFSQ 2013 conference on Requirements Engineering: Foundation for Software Quality.  He is member in the German computer science society. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, joerg.doerr@iese.fraunhofer.de

• TORE

Hans van Loenhoud MSc is a consultant and teacher at Taraxacum in the Netherlands. He has been working in software development for more than 35 years, starting as a Cobol programmer and later on specialized in test and quality management.
In this role, he has been teaching various ISTQB test courses and has been chair of TestNet, the Dutch association of professional software testers. In recent years, he joined IREB to build a bridge between software testing and requirements engineering. He gives various Business Analysis, Requirements Engineering and Software Testing trainings. Hans is also a lecturer at the Amsterdam University of Applied Sciences for these topics and participates in the IREB advanced level Elicitation working group.

• The goal is to solve the problem

Dr. Kim Lauenroth is Chief Requirements Engineer and leads a competence centre for requirements engineering at adesso AG.

He has over 10 years of experience in software and requirements engineering in different domains. He regularly speaks at internal conferences in the topic of RE. Within IREB, he is involved in the development of the advanced level module Elicitation & Consolidation.

Kim received his PhD in the field of requirements engineering from the University of Duisburg-Essen and studied computer science, business administration and psychology at the University of Dortmund.

• The goal is to solve the problem

Dr. Patrick Steiger, based in Switzerland, leads the requirements engineering activities of Infometis AG and is a part-time teacher at the MAS HCID (Human-Computer Interaction Design) which is provided as a cooperation of University of Basle and HSR Hochschule für Technik Rapperswil.
Since more than 20 years he works as a consultant in software engineering projects, focusing on requirements engineering. His PhD was on the topic of “Personal Risk Management”, which already at that time addressed problems and goals of individuals.

• The goal is to solve the problem

Dipl.-Ing. Oliver Stypa is head of the consulting department at Gemini Business Solutions GmbH, Aachen (Germany).

As a Mechanical Engineer (Dipl.-Ing.) from RWTH Aachen University (Germany) and IREB-CPRE, Mr. Stypa focuses on RE in manufacturing industry sectors. Understanding both worlds of mechanical engineers and software developers he successfully combines advantages of software based Requirements Engineering methodology and conventional machine development processes to improve development projects in integrated industries.

• The Context-Canvas

Sebastian Schlaus, B.Sc. is a strategy and production management expert in the consulting department at Gemini Business Solutions GmbH, Aachen (Germany).

Mr. Schlaus is a Business Administrator and Mechanical Engineer (B.Sc.) from RWTH Aachen University (Germany) and IREB-CPRE. As such, he focuses on strategic and production management in the international industry and entrepreneurial contexts. His background in the fields of engineering, industrialization and management enriches the team’s diverse composition by ensuring lean processes.

• The Context-Canvas

Karol Frühauf is co-founder of INFOGEM AG in Switzerland, since 1987 consulting in the field of software project and quality management (http://www.infogem.ch). He worked 12 years for BBC Brown Boveri & Cie and helped since 1987 many companies to improve their processes and products. He co-authored two books and is a frequent speaker, tutor and teacher in the field of software engineering. His main interests are test and quality management and requirements engineering.
He initiated and directs the "Bridge Guard Art / Science Residence Centre" in Štúrovo, Slovakia (http://www.bridgeguard.org).

• Sharing My Doubts on the Focus of Requirements
• Sharing My Doubts on Goals and Requirements
• Sharing My Doubts on Shall / Should / Will etc.
• Sharing My Doubts on Acceptance Criteria

Cristina Palomares is a PhD student in the Software Engineering for Information Systems Research Group (GESSI) at the Universitat Politècnica de Catalunya (UPC). Her PhD thesis deals about the construction, use and evolution of software requirement patterns for the reuse of requirements knoledge.

She has published several papers and presented posters and demos in requirements engineering conferences like in IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She is the coordinator of developers of the PABRE System for supporting requirements reuse.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Dr. Carme Quer is associate professor in the Service and Information System Engineering department (ESSI) at the Universitat Politècnica de Catalunya (UPC). She is member of the Software Engineering for Information Systems Research Group (GESSI) at the UPC. Her main research lines are requirements engineering and software quality.

She has published several papers in requirements engineering conferences like in the IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She was General Chair of the Workshop on Requirements Engineering (WER) held in 2008.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Xavier Franch is Professor at the Universitat Politècnica de Barcelona (UPC-BarcelonaTech), Spain. He is Council Member and Full Member of the IREB association. He has published over 200 peer-reviewed papers in conferences and journals, many of them related to requirements engineering. He was Program Co-Chair of the RE’16 and REFSQ’11 conferences, and he belongs to the Editorial Board of the Requirements Engineering Journal (Springer) and Information Software and Technology (IST) journals, among others. He is coordinator of the Q-Rapids project and participates in the OpenReq project, both in the H2020 programme. He organizes workshops concerning requirements engineering for NLP4RE, CrowdRE, JIT-RE and others.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Till-J. Faßold is Expert Strategic Planning at 1&1, Germany. In this role – besides other responsibilities – he coaches professionals from various departments and is responsible for the requirements engineering processes. Till-J. Faßold hold a master’s degree in information management from the University of Koblenz and is certified to the IREB CPRE Expert Level.

• Requirements Engineering and Domain Knowledge

Andreas Maier studied Computational Linguistics, Language Science and Technology and Philosophy at Saarland University in Saarbrücken, Germany. From November 2008 to April 2018, he worked as scientific assistant at Fraunhofer IESE, where he focused on the elicitation and the automatic analysis of user requirements provided in natural language. In May 2019, he finished his PhD in computer science, where he investigated difficulties in the identification and specification of hedonic quality in user requirements and developed possible solutions for the mitigation of these difficulties.

• ReqInspector

Simon Darting studied applied computer science with focus on communication at the University of Applied Sciences in Worms, Germany. Subsequent to his studies he started working as a researcher at Fraunhofer IESE in 2012, where he focused on requirements- and systems engineering within large-scale projects. In 2017 he completed his Master's degree in "Software Engineering for Embedded Systems" at the Technical University of Kaiserslautern, Germany. Since December 2018, he has been employed at BASF SE in Advanced Business Analytics with a focus on predictive maintenance.

• ReqInspector

Pascal Roques is a senior consultant and trainer who has been modeling for more than twenty five years in various domains. He began with SADT and OMT, then moved to UML (OCUP Advanced Certification) and RUP in Valtech, where he was in charge of the Modeling part of the training catalog. Pascal is now working on his own at PRFC [www.prfc.fr], mainly in the field of Systems Modeling with SysML. He is also co-founder of SysML France association, and published several books on UML and SysML in French.

• Modeling Requirements with SysML

Bastian Tenbergen is an Assistant Professor for Computer Science at the State University of New York at Oswego. He has co-authored articles and contributed to several books in the area of Software Engineering. Bastian’s main research focus is on Model-Based Requirements Engineering, Context Analysis, and Safety of Embedded and Cyber-Physical Systems. He has many years of project and consulting experience and has worked closely with industry.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Thorsten Weyer is a research group leader at the University of Duisburg-Essen. He has been a member of organization committees, program committees and reviewer for scientific conferences and journals. Thorsten gives regular lectures at the University and is an experienced conference speaker. He has also held several leading positions in research projects and technology transfer projects. He is member of the IREB council and head of the IREB working group Requirements Modeling.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Froese works as a research assistant in the working group Software Systems Engineering (Prof. Dr. Klaus Pohl) at the University of Duisburg-Essen. He worked in several research projects where he was able to expand his knowledge in the domain of Requirements Engineering for software-intensive Embedded Systems, as well as in those of model-based Context Analysis and context-based Quality Assurance.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Jan Christoph Wehrstedt works as a mathematician at the Technology Field Automation & Control at Siemens Corporate Technology. Currently he is Senior Key Expert for Efficient Simulation Driven System Development. He is the project manager of several business (Siemens internal) and public funded projects dealing with the integration of simulation and modeling approaches towards a simulation based engineering of technical systems and plants and it’s embedding into PLM lifecycle and tools.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Veronika Brandstetter is a mathematician in the Technology Field Automation & Control at Siemens Corporate Technology. She is developing methods for seamless engineering and improved operation of technical systems based on simulation. Recently, she focused on simulation based design for manufacturing technologies. She has been working in various Siemens internal research projects as well as in publicly funded projects also managing part of them in different groups within the Technology Field.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Joy Beatty is a VP at Seilevel, a professional services company whose mission is to define software that customers love to use. Joy implements new methodologies that improve the requirements process. Her team provides assessments, mentoring, training and consulting services for F1000 companies.

Joy is actively involved as a leader in the requirements community. She was a co-author of PMI’s Business Analysis for Practitioners: A Practice Guide, as well as being on the core team for the IIBA’s Business Analysis Body of Knowledge (BABOK) version 3. She is also a contributing author to “The Guide to Business Analysis” which “Includes the Standard for Business Analysis” by PMI. She co-authored Visual Models for Software Requirements with Anthony Chen and Software Requirements, 3rd Edition with Karl Wiegers.

• Making “agiLE” Work
• Project Value Delivered

Candase is a Product Manager at Seilevel. As a trainer and a practitioner, she helps ensure her clients’ software projects deliver the most return on investment, and helps define the problems their projects are trying to solve. She has provided training for business analysts in F300 companies, as well as assisting in the development of Seilevel training material. She also provided editorial contributions to both Visual Models for Software Requirements and Software Requirements, 3rd Edition.

• Making “agiLE” Work
• Project Value Delivered

Luisa Mich is an Associate Professor of Computer Science at the University of Trento, Italy. Her research interests include requirements engineering, creativity and web strategies. She is an author of more than 150 papers.
 

• Interview with John Mylopoulos
• Requirements Elicitation (ReqElic) in My Company

Ravishankar is a consultant with Financial Services division of Capgemini Financial Services with an overall experience of 13 years in the Banking and Financial Service sector. He has managed million dollar projects for Global Banking and Insurance companies and has advised clients in areas of Financial Risk & Regulation, Data Management, Analytics, Product Development and day -to-day operations.
He is a certified in Financial Risk Management (FRM), Project Management (PMP) and Data Mining (University of California) .In his spare time he enjoys conducting classes in Project Management and Business Analysis.

• Evolving and Improving the Requirements Approach to Big Data Projects

Gildas PREMEL-CABIC works as a Business Analyst at Capgemini (France). Gildas holds the IREB CPRE foundation level certificate. His business domain is the use of simulation for Defence activities. His main domain of interest concerns system modeling and simulation.

• Discovering System Requirements through SysML

Thijmen works as IT architect at Kommuninvest acting as technical lead for its digitalization initiative and growing CI/CD and Agile practice in the company. His work on the mini-QAW started in his role as researcher at ABB, where he worked on software architectures with colleagues around the globe. He authored publications at leading international software conferences, receiving two best paper awards. Thijmen graduated cum-laude in software engineering from VU University in the Netherlands and Malardalen University in Sweden.

• Discover Quality Requirements with the Mini-QAW

Michael Keeling is a software engineer at LendingHome and the author of Design It! From Programmer to Software Architect. In his career so far, he has worked on a variety of interesting software systems including IBM Watson, enterprise search applications, financial platforms, and Navy combat systems. Michael has a master’s degree in software engineering from Carnegie Mellon University and a bachelor’s degree in computer science from the College of William and Mary. Contact him via Twitter @michaelkeeling or his website, https://www.neverletdown.net

• Discover Quality Requirements with the Mini-QAW

Will Chaparro is a software development manager in IBM’s Watson Group. He spent over 5 years designing and building complex enterprise search solutions as a managing consultant. Prior to IBM he spent 11 years as a software engineer. He has a BS in Computer Science from the University of Pittsburgh.

• Discover Quality Requirements with the Mini-QAW

Priyank Arora is a Senior Business Analyst working in the digital IT space for 12+ years. He is a CBAP certified professional with a Core Credential in Business Analytics from Harvard Business School. He works on large scale digital transformation projects for the world’s leading travel group, where he helped to transition the requirement engineering processes from traditional to Agile working methodologies. He was also involved with a machine learning initiative within his organisation and is a data science enthusiast with an interest in applying analytical thinking and decision automation for business growth.

• Data Science – the expanding frontier for Business Analysts

Prof. Dr. Salinesi is an active academic who teaches topics in relation with software design such as Requirements Engineering, and Software Product Lines. He was involved in many funded research projects (FP4, FP5, H2020, ANR) and was the leader for collaborations and consultancy works for various companies such as France Télécom, SNCF, Renault, EDF or REXEL). He has been General Chair of SPLC, CAiSE, REFSQ international conferences, and was Organizing Chair of the 13th IEEE International Conference on Requirements Engineering.

At IREB, Prof Salinesi has acted for 2 mandates as Second Chair of the Executive Committee. He is now Full Member, member of the Editorial Board, and WG Member.

• Conversation with an Artificial Intelligence

Gil Regev has been a researcher at EPFL since 1997 in the fields of enterprise information systems, requirements engineering, change management and knowledge management. Since 2008 he is also manager and consultant at Itecor, a boutique consultancy firm. Previously Gil developed software for computer peripherals at Logitech, in Switzerland and California.

• A General Systems Thinking Perspective on the CPRE

Alain Wegmann is a full professor at the School of Computer and Communication Sciences, EPFL, Switzerland. He worked 14 years for Logitech (Switzerland, Taiwan, US) in positions ranging from software developer, IS manager, manufacturing engineering to VP of engineering and OEM marketing before joining the EPFL in 1997. His teaching, consulting and research are in the fields of enterprise architecture, requirements engineering and service engineering.

• A General Systems Thinking Perspective on the CPRE

Olivier Hayard has been a consultant and in charge of IT and Knowledge Management at Itecor, a boutique consultancy firm, since 1993. Olivier’s main interests are business analysis and requirements management, as practitioner, trainer and researcher.

• A General Systems Thinking Perspective on the CPRE