Articles

Jens Schirpenbach has been working as a consultant in the area of Product Lifecycle management for more than 12 years focusing on operations transformation in the area of Engineering and Services. He worked as a solution architect and project manager for diverse projects, essentially in the automotive, aerospace and manufacturing industry. He managed a team for PLM at a major European consultancy. After eleven years in consulting he founded P&PM Solutions & Consulting.
He has a joint master degree in mechanical Engineering and business administration of the University of Darmstadt, Germany.

• Opportunities & Approaches

Daniel Méndez is an Associate Professor for Software Engineering at the Blekinge Institute of Technology, Sweden and Senior Scientist at fortiss, the research institute of the Free State of Bavaria for software-intensive systems and services. His research is on Empirical Software Engineering with a particular focus on interdisciplinary, qualitative research in Requirements Engineering and its quality improvement. He regularly publishes in various software engineering publications and has occupied several key positions in venues of the empirical software engineering community. He is a member of the ACM, the IEEE Computer Society, and the German association of university professors and lecturers, and he serves as the representative to ISERN, the International Empirical Software Engineering Research Network. Further information is provided at www.mendezfe.org.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Xavier Franch is Professor at the Universitat Politècnica de Barcelona (UPC-BarcelonaTech), Spain. He is Council Member and Full Member of the IREB association. He has published over 200 peer-reviewed papers in conferences and journals, many of them related to requirements engineering. He was Program Co-Chair of the RE’16 and REFSQ’11 conferences, and he belongs to the Editorial Board of the Requirements Engineering Journal (Springer) and Information Software and Technology (IST) journals, among others. He is coordinator of the Q-Rapids project and participates in the OpenReq project, both in the H2020 programme. He organizes workshops concerning requirements engineering for NLP4RE, CrowdRE, JIT-RE and others.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Modeling Requirements and Context as a means for Automated Requirements Validation

Ravishankar is a consultant with Financial Services division of Capgemini Financial Services with an overall experience of 13 years in the Banking and Financial Service sector. He has managed million dollar projects for Global Banking and Insurance companies and has advised clients in areas of Financial Risk & Regulation, Data Management, Analytics, Product Development and day -to-day operations.
He is a certified in Financial Risk Management (FRM), Project Management (PMP) and Data Mining (University of California) .In his spare time he enjoys conducting classes in Project Management and Business Analysis.

• Evolving and Improving the Requirements Approach to Big Data Projects

Gil Regev has been a researcher at EPFL since 1997 in the fields of enterprise information systems, requirements engineering, change management and knowledge management. Since 2008 he is also manager and consultant at Itecor, a boutique consultancy firm. Previously Gil developed software for computer peripherals at Logitech, in Switzerland and California.

• A General Systems Thinking Perspective on the CPRE

Alain Wegmann is a full professor at the School of Computer and Communication Sciences, EPFL, Switzerland. He worked 14 years for Logitech (Switzerland, Taiwan, US) in positions ranging from software developer, IS manager, manufacturing engineering to VP of engineering and OEM marketing before joining the EPFL in 1997. His teaching, consulting and research are in the fields of enterprise architecture, requirements engineering and service engineering.

• A General Systems Thinking Perspective on the CPRE

Olivier Hayard has been a consultant and in charge of IT and Knowledge Management at Itecor, a boutique consultancy firm, since 1993. Olivier’s main interests are business analysis and requirements management, as practitioner, trainer and researcher.

• A General Systems Thinking Perspective on the CPRE

Priyank Arora is a Senior Business Analyst working in the digital IT space for 12+ years. He is a CBAP certified professional with a Core Credential in Business Analytics from Harvard Business School. He works on large scale digital transformation projects for the world’s leading travel group, where he helped to transition the requirement engineering processes from traditional to Agile working methodologies. He was also involved with a machine learning initiative within his organisation and is a data science enthusiast with an interest in applying analytical thinking and decision automation for business growth.

• Data Science – the expanding frontier for Business Analysts

Prof. Dr. Salinesi is an active academic who teaches topics in relation with software design such as Requirements Engineering, and Software Product Lines. He was involved in many funded research projects (FP4, FP5, H2020, ANR) and was the leader for collaborations and consultancy works for various companies such as France Télécom, SNCF, Renault, EDF or REXEL). He has been General Chair of SPLC, CAiSE, REFSQ international conferences, and was Organizing Chair of the 13th IEEE International Conference on Requirements Engineering.

At IREB, Prof Salinesi has acted for 2 mandates as Second Chair of the Executive Committee. He is now Full Member, member of the Editorial Board, and WG Member.

• Conversation with an Artificial Intelligence

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests
• Automated Quality Assurance

Eduard C. Groen is engineering psychologist. His fascination with the rapid rise of man-machine interfaces and other changes that affect society inspires him to contribute with technologies that optimally make use of the potential that these developments bring. As Fraunhofer IESE operates at the intersection of science and industry, he is involved in a variety of projects, while leading the development of the “Crowd-based Requirements Engineering” approach.

• How Requirements Engineering can benefit from crowds

Matthias Koch studied computer science with a focus on software engineering. Since 2012, he is employed as engineer at Fraunhofer IESE and mainly addresses the topics of requirements engineering and business analysis. In this context, he was involved in research projects on the pre-project and requirements definition phase, case studies and product evaluations. In research as well as industry projects, he regularly acts as requirements responsible, conducts workshops with customers and provides consulting.

• How Requirements Engineering can benefit from crowds

Andreas Maier studied Computational Linguistics, Language Science and Technology and Philosophy at Saarland University in Saarbrücken, Germany. From November 2008 to April 2018, he worked as scientific assistant at Fraunhofer IESE, where he focused on the elicitation and the automatic analysis of user requirements provided in natural language. In May 2019, he finished his PhD in computer science, where he investigated difficulties in the identification and specification of hedonic quality in user requirements and developed possible solutions for the mitigation of these difficulties.

• ReqInspector

Simon Darting studied applied computer science with focus on communication at the University of Applied Sciences in Worms, Germany. Subsequent to his studies he started working as a researcher at Fraunhofer IESE in 2012, where he focused on requirements- and systems engineering within large-scale projects. In 2017 he completed his Master's degree in "Software Engineering for Embedded Systems" at the Technical University of Kaiserslautern, Germany. Since December 2018, he has been employed at BASF SE in Advanced Business Analytics with a focus on predictive maintenance.

• ReqInspector

Cristina Palomares is a PhD student in the Software Engineering for Information Systems Research Group (GESSI) at the Universitat Politècnica de Catalunya (UPC). Her PhD thesis deals about the construction, use and evolution of software requirement patterns for the reuse of requirements knoledge.

She has published several papers and presented posters and demos in requirements engineering conferences like in IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She is the coordinator of developers of the PABRE System for supporting requirements reuse.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Dr. Carme Quer is associate professor in the Service and Information System Engineering department (ESSI) at the Universitat Politècnica de Catalunya (UPC). She is member of the Software Engineering for Information Systems Research Group (GESSI) at the UPC. Her main research lines are requirements engineering and software quality.

She has published several papers in requirements engineering conferences like in the IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She was General Chair of the Workshop on Requirements Engineering (WER) held in 2008.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Xavier Franch is Professor at the Universitat Politècnica de Barcelona (UPC-BarcelonaTech), Spain. He is Council Member and Full Member of the IREB association. He has published over 200 peer-reviewed papers in conferences and journals, many of them related to requirements engineering. He was Program Co-Chair of the RE’16 and REFSQ’11 conferences, and he belongs to the Editorial Board of the Requirements Engineering Journal (Springer) and Information Software and Technology (IST) journals, among others. He is coordinator of the Q-Rapids project and participates in the OpenReq project, both in the H2020 programme. He organizes workshops concerning requirements engineering for NLP4RE, CrowdRE, JIT-RE and others.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Bastian Tenbergen is an Assistant Professor for Computer Science at the State University of New York at Oswego. He has co-authored articles and contributed to several books in the area of Software Engineering. Bastian’s main research focus is on Model-Based Requirements Engineering, Context Analysis, and Safety of Embedded and Cyber-Physical Systems. He has many years of project and consulting experience and has worked closely with industry.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Thorsten Weyer is a research group leader at the University of Duisburg-Essen. He has been a member of organization committees, program committees and reviewer for scientific conferences and journals. Thorsten gives regular lectures at the University and is an experienced conference speaker. He has also held several leading positions in research projects and technology transfer projects. He is member of the IREB council and head of the IREB working group Requirements Modeling.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Froese works as a research assistant in the working group Software Systems Engineering (Prof. Dr. Klaus Pohl) at the University of Duisburg-Essen. He worked in several research projects where he was able to expand his knowledge in the domain of Requirements Engineering for software-intensive Embedded Systems, as well as in those of model-based Context Analysis and context-based Quality Assurance.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Jan Christoph Wehrstedt works as a mathematician at the Technology Field Automation & Control at Siemens Corporate Technology. Currently he is Senior Key Expert for Efficient Simulation Driven System Development. He is the project manager of several business (Siemens internal) and public funded projects dealing with the integration of simulation and modeling approaches towards a simulation based engineering of technical systems and plants and it’s embedding into PLM lifecycle and tools.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Veronika Brandstetter is a mathematician in the Technology Field Automation & Control at Siemens Corporate Technology. She is developing methods for seamless engineering and improved operation of technical systems based on simulation. Recently, she focused on simulation based design for manufacturing technologies. She has been working in various Siemens internal research projects as well as in publicly funded projects also managing part of them in different groups within the Technology Field.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Till-J. Faßold is Expert Strategic Planning at 1&1, Germany. In this role – besides other responsibilities – he coaches professionals from various departments and is responsible for the requirements engineering processes. Till-J. Faßold hold a master’s degree in information management from the University of Koblenz and is certified to the IREB CPRE Expert Level.

• Requirements Engineering and Domain Knowledge