Topic – Methods

Grigory Grin is a Chief Software Architect at Axinom – software supplier for Media- and In-Flight Entertainment solutions based in Germany and Estonia.
Grigory studied mathematics and graduated from the Ural State University in Russia in 1995. During his 25 years career on the software development field, Grigory had responsibilities in a broad range of roles – Development, Architecture, Business Analysis, Project Management. His main strengths are in alignment between the customer needs and contractors technical capabilities and solution portfolio to deliver the highest business value.
As a practitioner, Grigory has successfully led multiple multi-million euro projects for world-known brands in the aerospace industry with significant challenges on the field of Requirements Engineering.

• When the rubber hits the road

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests

Dr.-Ing. Birgit Demuth has over 20 years experience as researcher and educator in software engineering.
Amongst other lectures, she teaches students in requirements engineering.

Her interests are how to apply model-based techniques in the continuous software life cycle.
In a large-scale software project course, she coaches students and student tutors to elicit and model (often real)
user requirements before they start to implement.

• Tracing Change Requests

Dr. Sebastian Adam received his Master of Science degree (“German Diplom”) in Computer Science from the Technical University of Kaiserslautern, Germany in 2005 and joined the Fraunhofer Institute for Experimental Software Engineering (IESE), Kaiserslautern, Germany in the same year. Since then, he is working there as a consultant, project leader and researcher for requirements engineering (RE) and has been coordinating and managing several national and international research and industry projects in the area of RE. Since 2011, he is leading the requirements engineering team at Fraunhofer IESE. In 2012, he received his Doctor degree (Dr.-Ing.) from the Technical University of Kaiserslautern. His work expertise and specific interests lie in the integration of requirements engineering with business process management, in lean requirements engineering as well as automatic requirements engineering by social media and mining technologies. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, sebastian.adam@iese.fraunhofer.de

• TORE

Norman Riegel is a Consultant, Project Manager and Researcher for Requirements Engineering at the Fraunhofer Institute for Experimental Software Engineering (IESE), Kaiserslautern, Germany. Je joined Fraunhofer IESE in 2007, after having received his diploma in business informatics with a focus on logistics and industrial management by the University of Mannheim, Germany. He has been consulting industrial companies in finance, insurance, logistics, medical, social media, public and other domains. He is conducting trainings, tutorials and lectures in requirements engineering. In his role as a researcher he is contributing to national and international research projects and is author of more than 20 peer reviewed publications. His research interests include lean requirements engineering, the integration of requirements engineering and business process management, prioritization and decision support. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, norman.riegel@iese.fraunhofer.de

• TORE

Dr. Joerg Doerr is head of the Information Systems division at the Fraunhofer Institute Experimental Software Engineering (IESE) in Kaiserslautern, Germany. Before, he was head of the Requirements and Usability Engineering department. His work areas include all software engineering areas for informations systems, with a special focus on requirements engineering, especially non-functional requirements. He received his master of science and PhD in Computer Science from the University of Kaiserslautern, Germany.  He leads diverse Training, industrial Technology-transfer and Research projects. He is lecturer at the University of Kaiserslautern, author of more than 60 peer reviewed publications and member in many international and national program committees. 2013, he was Co-Chair of the REFSQ 2013 conference on Requirements Engineering: Foundation for Software Quality.  He is member in the German computer science society. Contact him at Fraunhofer IESE, Fraunhofer-Platz 1, 67663 Kaiserslautern, Germany, joerg.doerr@iese.fraunhofer.de

• TORE

Mats Wessberg holds a Masters degree in mathematics and computer science. He has been active in the IT community since the mid-nineties, initially as a software engineer but mainly as a consultant, often mentoring software projects in requirements engineering and methodology.

In 2006, he co-founded Inceptive, a Sweden based consulting firm specializing in software testing and requirements engineering, and was the company's CEO until 2013. He then founded Metrical, a company dedicated in helping software organizations boost their efficiency through process automation. Mats is currently CEO of Metrical.

• Think Like a Scientist

Albert Tort is the Research&Innovation Solutions Lead in Sogeti Spain. During the last years, he has been working as Quality Assurance and Software Control & Testing specialist in several projects for customers in different sectors (banking, airlines, insurance, procurement, etc.). Furthermore, he has been the lead of research&innovation projects developed at Sogeti. He was the winner of the “Capgemini-Sogeti Testing Innovation Awards 2015” for the submission of the best individual entry "Recover: Reverse Modeling and Up-To-Date Evolution of Functional Requirements in Alignment with Tests. He is also a member of the SogetiLabs community.

Previously, he served as a professor and researcher at the Services and Information Systems Engineering Department of the Universitat Politècnica de Catalunya-Barcelona Tech. As a member of the Information Modeling and Processing (MPI) research group, he focused his research on conceptual modeling, software engineering methodologies, OMG standards, knowledge management, requirements engineering, service science, semantic web and software quality assurance. Currently, he is also the coordinator of the postgraduate degree in Software Quality Assurance of the School of Professional & Executive Development of the Technical University Of Catalunya (BarcelonaTech).

He obtained his Computer Science degree in 2008 and he received his M.Sc. in Computing in 2009. In 2012 he presented the PhD thesis “Testing and Test-Driven Development of Conceptual Schemas”. He is the author of several publications in software engineering journals and conferences.

• KCycle: Knowledge-Based & Agile Software Quality Assurance
• The Recover Approach

Project manager since 2008, certified Scrum Product Owner, Agile Project Manager, with foundations of PRINCE2. Over six years of experience as a UX designer and researcher. Worked in digital agencies as a digital project manager, then switched to the client's side. Head of Product in iTaxi, then in Pergamin (e-signature). Worked also for libraries and museums in Poland to help improve the accessibility of digital products.

Awarded by Innovation Ad Award for the prototype for Sensodyne and by nomination in Mobile Trends for the mobile app for drivers. An author of articles about product management, user experience, and accessibility.

• The Potential of User Tests for Requirements Engineering

Manon Penning has a broad background in the fields of IT and education. She is an educational specialist, requirements engineer, quality analyst and trainer currently employed by Improve Quality Services, a provider of consultancy and training. Via Improve Quality Services she has been working for several Dutch companies over the past few years.

• Biased Toddlers
• The Genius Toddler Challenge

Dipl.-Ing. Oliver Stypa is head of the consulting department at Gemini Business Solutions GmbH, Aachen (Germany).

As a Mechanical Engineer (Dipl.-Ing.) from RWTH Aachen University (Germany) and IREB-CPRE, Mr. Stypa focuses on RE in manufacturing industry sectors. Understanding both worlds of mechanical engineers and software developers he successfully combines advantages of software based Requirements Engineering methodology and conventional machine development processes to improve development projects in integrated industries.

• The Context-Canvas

Sebastian Schlaus, B.Sc. is a strategy and production management expert in the consulting department at Gemini Business Solutions GmbH, Aachen (Germany).

Mr. Schlaus is a Business Administrator and Mechanical Engineer (B.Sc.) from RWTH Aachen University (Germany) and IREB-CPRE. As such, he focuses on strategic and production management in the international industry and entrepreneurial contexts. His background in the fields of engineering, industrialization and management enriches the team’s diverse composition by ensuring lean processes.

• The Context-Canvas

Gareth is an experienced business analyst and product owner who has been working in the telecoms and other industries for longer than he’d like to be specific about. He has been an active member of IREB for some years and is a co-author and examiner within the RE@Agile working group. He lives and works in Germany having successfully escaped from a small, slightly uncooperative island.

• Splitting Requirements at Scale
• RE in Agile Projects: Survey Results
• RE in Agile Projects: a Survey
• How agile can Requirements Engineers really be?

Brett Bicknell is an engineer at Critical Software Technologies and has played a key role in a number of formal methods initiatives, including the FP7 ADVANCE project. His software engineering experience encompasses varying levels of criticality and verification and validation activities. His previous work includes embedded systems, solutions for data acquisition and analysis, and a number of European-funded R&D ventures. He holds a BSc degree in Physics.

• Rigorous Verification

Karim Kanso has worked within the field of formal methods and software engineering for many years, on various projects in the domains of transportation and aerospace. He has received a PhD in theoretical computer science, and is actively interested in the question of how requirement engineering can be applied to new disciplines, such as autonomous system engineering? He is currently working on the ADVANCE programme at Critical Software Technologies.

• Rigorous Verification

Daniel McLeod has worked on a variety of imaging sensor systems in the Airborne, Land and Naval domains. His previous work includes algorithm development, system design, requirements analysis and verification and project management. He is currently working within the smart energy domain on a Low Voltage monitoring system and a system for automated control of low voltage transformers in response to customer demand and distributed generation.

• Rigorous Verification

Nuno Santos is currently a Senior Business Analyst at Natixis Portugal. He holds a PhD in Technologies and Information Systems, and is also certified from Agile Alliance as CSPO, and from the IIBA as CCBA, AAC and POA. He has also written articles about requirements, agility and product ownership at RE Magazine, BA Digest, Analyst Catalyst, Medium, and in several scientific conferences.

• Requirements Elicitation in Modern Product Discovery
• Inputs to requirements engineering in agile projects

Fabrício Laguna is the first CBAP © in Latin America (CBAP - Certified Professional in Business Analysis by IIBA © - International Institute of Business Analysis), also certified PMP Project Manager by PMI.

He holds a degree in Computer Science from USP, an MBA in Business Administration from FUNDACE (Foundation linked to FEA USP) and a degree in Entrepreneurship from the EMPRETEC program at SEBRAE.

He is currently President of the IIBA São Paulo Chapter, where he coordinated the translation project of Guia BABOK © into the Portuguese language. He was a reviewer of the 3rd version of this guide in partnership with specialists in Business Analysis from several countries.

He has experience in systems development and in the implementation of systems development methodologies in several companies, mainly in the financial market.
Parallel to his work in the IT area, he participated in several theater groups as an actor and playwright. The mixture of technical and communication skills has created a singular facility to act as an instructor in training and lectures, which has been recognized by all the places where it operates.

He has been teaching for more than 15 years, having undergraduate courses (Federal University of São Carlos), post-graduation (University of Marília, IBPI SP and RJ and Anhembi Morumbi), extension courses (USP and UNAERP), and more than 10,000 hours of training for professionals in several large companies.

• REQM guidance matrix

Andreas Maier studied Computational Linguistics, Language Science and Technology and Philosophy at Saarland University in Saarbrücken, Germany. From November 2008 to April 2018, he worked as scientific assistant at Fraunhofer IESE, where he focused on the elicitation and the automatic analysis of user requirements provided in natural language. In May 2019, he finished his PhD in computer science, where he investigated difficulties in the identification and specification of hedonic quality in user requirements and developed possible solutions for the mitigation of these difficulties.

• ReqInspector

Simon Darting studied applied computer science with focus on communication at the University of Applied Sciences in Worms, Germany. Subsequent to his studies he started working as a researcher at Fraunhofer IESE in 2012, where he focused on requirements- and systems engineering within large-scale projects. In 2017 he completed his Master's degree in "Software Engineering for Embedded Systems" at the Technical University of Kaiserslautern, Germany. Since December 2018, he has been employed at BASF SE in Advanced Business Analytics with a focus on predictive maintenance.

• ReqInspector

Frank Rabeler is a Business Analyst at T-Systems in Germany, where he specializes in requirements engineering for telecommunications software systems. Previously he worked as a database expert with focus on data modeling. How to design documents, data models etc. in the best readable way? Questions like these have been challenging him over the last 25 years as an IT professional. For 15 years now he has been using Information Mapping as part of his daily work and he appreciates this method as a success factor - especially in RE.

• Readable requirements

Erik van Veenendaal (www.erikvanveenendaal.nl) is a leading international consultant and trainer, and a widely recognized expert in the area of software testing and quality management.

He is the founder of Improve Quality Services BV (www.improveqs.nl). He holds the EuroSTAR record, winning the best tutorial award three times! In 2007 he received the European Testing Excellence Award for his contribution to the testing profession over the years. He has been working as a test manager and consultant in various domains for more than 20 years. He has written numerous papers and a number of books, including “Practical Risk-Based Testing: The PRISMA Approach” and “ISTQB Foundations of Software Testing”. He is one of the core developers of the TMap testing methodology and a participant in working parties of the International Requirements Engineering Board (IREB). Erik is also a former part-time senior lecturer at the Eindhoven University of Technology, vice-president of the International Software Testing Qualifications Board (2005–2009) and currently board member of the TMMi Foundation.

You can follow Erik on twitter via @ErikvVeenendaal.

• RE for Testers

Jens Schirpenbach has been working as a consultant in the area of Product Lifecycle management for more than 12 years focusing on operations transformation in the area of Engineering and Services. He worked as a solution architect and project manager for diverse projects, essentially in the automotive, aerospace and manufacturing industry. He managed a team for PLM at a major European consultancy. After eleven years in consulting he founded P&PM Solutions & Consulting.
He has a joint master degree in mechanical Engineering and business administration of the University of Darmstadt, Germany.

• Opportunities & Approaches

Pascal Roques is a senior consultant and trainer who has been modeling for more than twenty five years in various domains. He began with SADT and OMT, then moved to UML (OCUP Advanced Certification) and RUP in Valtech, where he was in charge of the Modeling part of the training catalog. Pascal is now working on his own at PRFC [www.prfc.fr], mainly in the field of Systems Modeling with SysML. He is also co-founder of SysML France association, and published several books on UML and SysML in French.

• Modeling Requirements with SysML

Dr. Michael Jastram is an expert model-based systems engineering (MBSE), with a focus on requirements. He has over 20 years experience in software development and requirements engineering, which he regularly shares as author and public speaker. Amongst other things, he publishes weekly updates on Systems Engineering Trends [German] and monthly updates on Requirements Engineering [English].

Michael is a leader in open source requirements management, being project lead of the Eclipse Requirements Modeling Framework. He is also a strong advocate of open standard and actively contributes to the OMG Requirements Interchange Format (ReqIF).

Today, he is founder and principal systems engineer of Formal Mind GmbH, a service provider in Open Systems Engineering.

You can connect digitally with Michael via his Blog [en] | Blog [de] | Twitter | LinkedIn | Xing.

• Modeling Requirements with Constraints

Andreas Kara has 15 years experience as IT project manager in leading positions, both representing customer and contractor. As a trainer, he helps his students to become successful project managers and to enjoy their profession. As a coach, he provides intense knowledge transfer on the job.

• Modeling Requirements with Constraints

Bastian Tenbergen is an Assistant Professor for Computer Science at the State University of New York at Oswego. He has co-authored articles and contributed to several books in the area of Software Engineering. Bastian’s main research focus is on Model-Based Requirements Engineering, Context Analysis, and Safety of Embedded and Cyber-Physical Systems. He has many years of project and consulting experience and has worked closely with industry.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Thorsten Weyer is a research group leader at the University of Duisburg-Essen. He has been a member of organization committees, program committees and reviewer for scientific conferences and journals. Thorsten gives regular lectures at the University and is an experienced conference speaker. He has also held several leading positions in research projects and technology transfer projects. He is member of the IREB council and head of the IREB working group Requirements Modeling.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Froese works as a research assistant in the working group Software Systems Engineering (Prof. Dr. Klaus Pohl) at the University of Duisburg-Essen. He worked in several research projects where he was able to expand his knowledge in the domain of Requirements Engineering for software-intensive Embedded Systems, as well as in those of model-based Context Analysis and context-based Quality Assurance.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Jan Christoph Wehrstedt works as a mathematician at the Technology Field Automation & Control at Siemens Corporate Technology. Currently he is Senior Key Expert for Efficient Simulation Driven System Development. He is the project manager of several business (Siemens internal) and public funded projects dealing with the integration of simulation and modeling approaches towards a simulation based engineering of technical systems and plants and it’s embedding into PLM lifecycle and tools.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Veronika Brandstetter is a mathematician in the Technology Field Automation & Control at Siemens Corporate Technology. She is developing methods for seamless engineering and improved operation of technical systems based on simulation. Recently, she focused on simulation based design for manufacturing technologies. She has been working in various Siemens internal research projects as well as in publicly funded projects also managing part of them in different groups within the Technology Field.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Ursula Meseberg (Dipl. Math.) is co-founder and principal of microTOOL GmbH, an IREB silver partner and training provider based in Berlin with 30 years of experience in model-driven software development, IT project management and requirements engineering. As head of strategic planning she is mentoring the current development of solutions for mobile requirements engineering. She is the author of numerous articles and a member of the IREB syllabus advisory board.

• Mobile RE

Tanja Weiß graduated as Master of Arts in Theatre Studies. She is in charge of Public Relations at microTOOL GmbH.

• Mobile RE

Áldrin Jaramillo Franco is a full-time Professor in the Department of Computer Science Engineering at University of Antioquia (Medellín, Colombia). Mr. Jaramillo is a Computer Science engineer from EAFIT University (Colombia); M. Sc. in Systems Engineering from National University of Colombia and Ph. D. candidate from Paris I University - Pantheón Sorbonne (Paris, France). His main interest area is software engineering with an emphasis in requirements engineering. He can be reached at: aldrin.jaramillo@udea.edu.co

• Leveraging Creativity Techniques in Requirements Elicitation

Saïd Assar, PhD, is an Associate Professor at Institut Mines-Telecom, Ecole de Management. His research interests include models, method and tools for IS development, e-learning and e-government. He published his work is in various journals, e.g., Empirical Software Eng., Latin American J. of Computing, Education Technology and Society; and in international conferences, e.g., COMPSAC, ICSOFT, RCIS, ECIS, AMCIS and HICSS.

• Leveraging Creativity Techniques in Requirements Elicitation

Rana Siadati is currently a PhD student in Software Requirements Engineering and also a visiting lecturer by the School of Computer Science at the University of Hertfordshire. Alongside these roles, Rana has many years of academic and industrial experience, also at managerial level, gained in the UK and abroad.

• Learning from history: The case of Software Requirements Engineering

Paul Wernick is a Senior Lecturer in Computer Science at the University of Hertfordshire. Dr Wernick has taken leading roles in the ProSim series of software process simulation workshops, and the IEEE Workshop on Software Evolvability. Dr Wernick’s current research interests cover the high-level human environment within which software processes occur and their simulation, and computer security.

• Learning from history: The case of Software Requirements Engineering

Vito Veneziano is a Senior Lecturer in Computer Science at the University of Hertfordshire, and his interests range from software engineering, HCI, requirements analysis and system modelling, to how software systems impact on organisations. Previously Dr Veneziano worked in IT and project management, business application development, software design and consultancy.

• Learning from history: The case of Software Requirements Engineering

Albert Tort is the Research&Innovation Solutions Lead in Sogeti Spain. During the last years, he has been working as Quality Assurance and Software Control & Testing specialist in several projects for customers in different sectors (banking, airlines, insurance, procurement, etc.). Furthermore, he has been the lead of research&innovation projects developed at Sogeti. He was the winner of the “Capgemini-Sogeti Testing Innovation Awards 2015” for the submission of the best individual entry "Recover: Reverse Modeling and Up-To-Date Evolution of Functional Requirements in Alignment with Tests. He is also a member of the SogetiLabs community.

Previously, he served as a professor and researcher at the Services and Information Systems Engineering Department of the Universitat Politècnica de Catalunya-Barcelona Tech. As a member of the Information Modeling and Processing (MPI) research group, he focused his research on conceptual modeling, software engineering methodologies, OMG standards, knowledge management, requirements engineering, service science, semantic web and software quality assurance. Currently, he is also the coordinator of the postgraduate degree in Software Quality Assurance of the School of Professional & Executive Development of the Technical University Of Catalunya (BarcelonaTech).

He obtained his Computer Science degree in 2008 and he received his M.Sc. in Computing in 2009. In 2012 he presented the PhD thesis “Testing and Test-Driven Development of Conceptual Schemas”. He is the author of several publications in software engineering journals and conferences.

• KCycle: Knowledge-Based & Agile Software Quality Assurance
• The Recover Approach

Martin Tate is an IT consultant who has now personally run or rescued 52 projects to select off-the-shelf solutions, interviewed over 725 people to capture the requirements for selections and appraised over 1,000 candidate solutions. A ‘poacher turned gamekeeper’, he formerly worked for an IT provider and was trained to sell software. BCS, The Chartered Institute for IT, made him a Chartered Fellow for eminence in evaluating software and recently published his book, a practitioner guide to procuring off-the-shelf IT.

• IT Requirements when Buying, not Making

Before working for SOPHIST, Kristina has lived and worked abroad in an intercultural environment. Due to her linguistic studies she is comfortable working with communication models, semantics and syntax. She has developed an excellent feeling for languages based on theory and experience. As consultant and trainer, she benefits from this feeling in the field of elicitation, documentation and management of natural language requirements.

• Is there something missing?

Andreas is consultant and trainer at SOPHIST GmbH and is specialized in object-oriented and linguistic methods in requirements engineering. His assignments include methods of linguistic analysis as well as of conceptual models. Moreover, Andreas deals with the generation of acceptance criteria and test cases in the context of requirements engineering. He also occupies the position of controller of the innovation projects at SOPHIST and is engaged in the training of new employees.

• Is there something missing?

Born and raised in France where she completed her studies in IT Project Management, Margaux worked two years as consultant in Project Management, both in France and in Germany. Through the different projects she worked in, she noticed the critical importance of good requirements engineering practices and thus chose to specialize in this domain. Over the last two years, she worked as a consultant and trainer in Requirements Engineering in Germany, making it her mission to support her clients to create and improve their RE processes. Now back in France, she wishes to put her experiences to the service of local companies.

• Is there something missing?

Suzanne Robertson is having a stellar career in information technology and systems engineering. Suzanne is a pioneer in adapting ideas from other domains for automated solutions. She has collaborated in workshops using experts from fields as diverse as modern music, visualization, and cookery. Ideas from these domains were adapted to make major breakthroughs in creative ideas for domains ranging from air traffic control to local government. She is co-author of the best-selling Mastering the Requirements Process, among other books and courses. She is co-creator of the Volere requirements techniques. She was the founding editor of the Requirements Column in IEEE Software.

• Integrating Business Events into your Agile Framework
• How Will It Work?

As a principal and founder of The Atlantic Systems Guild, James Robertson is known for his work in implementing systems engineering principles that link business specialists with solution specialists. James is a consultant, lecturer, author, project leader whose area of concern is the requirements for software, and the contribution that good business analysis makes to successful projects. James is co-author of 5 books that have been influential in the business analysis world. His training as an architect has led to his work on good design principles and to his focus on how innovation can be integrated with business analysis.

• Integrating Business Events into your Agile Framework
• How Will It Work?

Nuno Santos is currently a Senior Business Analyst at Natixis Portugal. He holds a PhD in Technologies and Information Systems, and is also certified from Agile Alliance as CSPO, and from the IIBA as CCBA, AAC and POA. He has also written articles about requirements, agility and product ownership at RE Magazine, BA Digest, Analyst Catalyst, Medium, and in several scientific conferences.

• Inputs to requirements engineering in agile projects

Nuno Ferreira is currently the head of research at i2S Insurance Knowledge, invited professor at ISEP of Porto's Polytechnique Institute and researcher at ALGORITMI research center of Minho’s University in Portugal. He holds a PhD in Software Engineering. He has a strong background in software engineering, project management and process management. His re-search interests are requirements elicitation, process-to-product transitions, logical architectures derivation, and process maturity models.

• Inputs to requirements engineering in agile projects

Ricardo J. Machado is a full professor of Information Systems Engineering and Technology in the Dept. of Information Systems at the University of Minho (UMinho), School of Engineering. Within the Information Systems Engineering domain, his primary research interests are in modelling and requirements for systems analysis and design and in process and project management life-cycles. He has supervised 50 completed PhD and MSc theses in these areas. He has published over 150 scientific publications and 4 industrial patents, and has acted as coordinator (PI) and senior researcher of over 50 R&D projects. Currently, at UMinho he is the vice-rector for institutional development, the director of the ALGORITMI Research Centre, the scientific coordinator of the EPMQ Laboratory at the CCG/ZGDV Institute, the director of the Doctoral Program in Advanced Engineering Systems for Industry, and member of the Board of the UM-Cities Platform.

• Inputs to requirements engineering in agile projects

For more than twenty years, Rainer Grau has accompanied companies on their way enterprise agility. He supports companies in their efforts to continuously develop and create sustainable value for customers and employees. For him, it is particularly exciting to find out which methods, techniques and approaches are suitable for scaling agility and building the right product and the right service for the customer. Business analysis and requirements engineering are two essential disciplines in this context, which also generate high value in an agile setup - even if perhaps lived completely differently compared to a classic project approach.

Rainer's background of experience in business agility is based on his consulting work with companies from various industries. Stages of his professional life include Distinguished Consultant and Partner at Zühlke Engineering, Head of Business Development at digitec Galaxus, responsible for courses at universities of applied sciences on the topic of agility, founder of the Swiss Agile Leaders Circle, founder of Denkplan Verein and active involvement in communities around agility, business analysis and requirements engineering.

If there is still time left, Rainer Grau likes to spend it with his family, doing sports, playing his guitar and reading novels.

• Mission Possible
• Innovation Arena

Suzanne Robertson is having a stellar career in information technology and systems engineering. Suzanne is a pioneer in adapting ideas from other domains for automated solutions. She has collaborated in workshops using experts from fields as diverse as modern music, visualization, and cookery. Ideas from these domains were adapted to make major breakthroughs in creative ideas for domains ranging from air traffic control to local government. She is co-author of the best-selling Mastering the Requirements Process, among other books and courses. She is co-creator of the Volere requirements techniques. She was the founding editor of the Requirements Column in IEEE Software.

• Integrating Business Events into your Agile Framework
• How Will It Work?

As a principal and founder of The Atlantic Systems Guild, James Robertson is known for his work in implementing systems engineering principles that link business specialists with solution specialists. James is a consultant, lecturer, author, project leader whose area of concern is the requirements for software, and the contribution that good business analysis makes to successful projects. James is co-author of 5 books that have been influential in the business analysis world. His training as an architect has led to his work on good design principles and to his focus on how innovation can be integrated with business analysis.

• Integrating Business Events into your Agile Framework
• How Will It Work?

Eduard C. Groen is engineering psychologist. His fascination with the rapid rise of man-machine interfaces and other changes that affect society inspires him to contribute with technologies that optimally make use of the potential that these developments bring. As Fraunhofer IESE operates at the intersection of science and industry, he is involved in a variety of projects, while leading the development of the “Crowd-based Requirements Engineering” approach.

• How Requirements Engineering can benefit from crowds

Matthias Koch studied computer science with a focus on software engineering. Since 2012, he is employed as engineer at Fraunhofer IESE and mainly addresses the topics of requirements engineering and business analysis. In this context, he was involved in research projects on the pre-project and requirements definition phase, case studies and product evaluations. In research as well as industry projects, he regularly acts as requirements responsible, conducts workshops with customers and provides consulting.

• How Requirements Engineering can benefit from crowds

Guilherme Siqueira Simões works on FATTO Software Consulting (www.fattocs.com). He is author of a book on Function Points and of another book on Requirements Engineering, and has trained thousands of people from Latin America on these subjects. He has more than 20 years of experience on software projects. He is graduated on computer science and business management. He is a certified professional on function points by IFPUG and COSMIC, requirements engineering by IREB and PMP by PMI.

• Functional Requirements and their levels of granularity

He has been a function point analysis user since 1991, instructor since 1993, certified function points specialists (CFPS) by IFPUG since 1996 and by COSMIC since 2012. In both certifications, was among the first Brazilians to hold them. In 2001, co-authored the book “APF: Medição, Estimativas e Gerenciamento de Projetos de Software”, currently in its 13th edition, with over 13,000 copies sold and the main reference book on the subject in Brazil. In 2016 coauthored the book "RE: Software Orientado ao Negocio” and became a certified professional for requirements engineering – foundation level – by the IREB.

• Functional Requirements and their levels of granularity

Gildas PREMEL-CABIC works as a Business Analyst at Capgemini (France). Gildas holds the IREB CPRE foundation level certificate. His business domain is the use of simulation for Defence activities. His main domain of interest concerns system modeling and simulation.

• Discovering System Requirements through SysML

Thijmen works as IT architect at Kommuninvest acting as technical lead for its digitalization initiative and growing CI/CD and Agile practice in the company. His work on the mini-QAW started in his role as researcher at ABB, where he worked on software architectures with colleagues around the globe. He authored publications at leading international software conferences, receiving two best paper awards. Thijmen graduated cum-laude in software engineering from VU University in the Netherlands and Malardalen University in Sweden.

• Discover Quality Requirements with the Mini-QAW

Michael Keeling is a software engineer at LendingHome and the author of Design It! From Programmer to Software Architect. In his career so far, he has worked on a variety of interesting software systems including IBM Watson, enterprise search applications, financial platforms, and Navy combat systems. Michael has a master’s degree in software engineering from Carnegie Mellon University and a bachelor’s degree in computer science from the College of William and Mary. Contact him via Twitter @michaelkeeling or his website, https://www.neverletdown.net

• Discover Quality Requirements with the Mini-QAW

Will Chaparro is a software development manager in IBM’s Watson Group. He spent over 5 years designing and building complex enterprise search solutions as a managing consultant. Prior to IBM he spent 11 years as a software engineer. He has a BS in Computer Science from the University of Pittsburgh.

• Discover Quality Requirements with the Mini-QAW

Priyank Arora is a Senior Business Analyst working in the digital IT space for 12+ years. He is a CBAP certified professional with a Core Credential in Business Analytics from Harvard Business School. He works on large scale digital transformation projects for the world’s leading travel group, where he helped to transition the requirement engineering processes from traditional to Agile working methodologies. He was also involved with a machine learning initiative within his organisation and is a data science enthusiast with an interest in applying analytical thinking and decision automation for business growth.

• Data Science – the expanding frontier for Business Analysts

Dr. Christof Ebert is managing director at Vector Consulting Services. He supports clients around the world to improve product strategy and product development and to manage organizational changes. A trusted advisor for companies around the world, member of industry boards, he lectures at the Universities of Stuttgart and at the Sorbonne in Paris. He authored several books including the popular “Systematic Requirements Engineering”. Contact him at christof.ebert@vector.com

• Cyber Security Requirements Engineering
• Product Management

Ulf Ackermann currently works as a Requirements Engineer in the B2B Industry Commerce division of T-Systems Multimedia Solutions GmbH. His degree in commercial information technology at the Dresden University of Applied Sciences helps him to capture customer requirements from both business and technical perspectives. He has more than 7 years’ experience in large scale E-Commerce projects and specializes in the area of project procedure models. He states: “Structuring a project from the few known variables to produce an appealing offering for the customer is the most challenging and in the end rewarding part of my daily work.”

• Customized Agile RE Process

Dirk Fritsch is a Principal Consultant in the requirements division at QA Systems GmbH.  He has over 10 years of experience in business analysis, process modelling and requirements engineering and has worked on customer projects from every sector. He collaborated in research projects at the University of Duisburg/Essen and the University of Leipzig, addressing recurring issues from customer projects to improve existing methods using new technologies and solutions. In his current work he focuses on training and coaching for requirements management using classical and agile methods.

• Customized Agile RE Process

Thorsten von Ramsch is Director Engineering at QAULITEST Group. He is an IREB Certified Requirements Engineer, ISTQB Certified Tester Full Advanced Level, ASQF Project Manager, Professional Scrum Master and iNTCCM Certified Professional for Configuration Management. His focus is on the banking and insurance sector, which he advises in the areas of requirements elicitation, test management and test analysis.

• Classical requirements and test analysis a discontinued model?

Jason Hansen obtained a BS in Chemical Engineering from Michigan Tech. He left the work force in 2005 to focus on raising an adopted special needs daughter. In 2015, he decided to return to school and obtained his AAAS in Network Admin. He is working as a tutor at GRCC while pursuing a Master’s Degree in Computer Software Engineering at GVSU.

• Challenges in the elicitation and determination of precise requirements from animal stakeholders

Dr. Carl Friedrich Kress works as Senior Consultant and Innovation Manager in Germany. He has written many articles about the scientific background of software cost estimation methods and metrics. His work helps IT project managers to reliably estimate and plan software development projects. Working in an agile environment he’s also experienced in creating precise requirements for agile developers.

• Catching the worm

Ina Paschen is a Senior Business Analyst and Project Manager at Zühlke Schweiz. As a practitioner and consultant she helps ensure her clients deliver successful projects: a clear project set-up, a solid requirements engineering process, clear requirements and business processes to be developed, an improved development process or a transparent communication between development and management to build trust, to reduce impediments, and therefore bridging worlds like agile and non-agile.

• Bridging communication gaps with a Feature Tree

Emmerich Fuchs has more than 30 years of experience in application development and is a consultant in business process modelling, requirements engineering and quality assurance. Since 1985 he has been teaching at technical colleges and universities of applied science, and is a well-known trainer, as well as a co-author and an examinant, as well as an active member of IREB.

• Bridging communication gaps with a Feature Tree

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests
• Automated Quality Assurance

Rodolphe Arthaud currently works as an expert consultant for Inspearit, particularly in the area of process improvement.
Early adopter of Object Oriented Analysis and OMT, he led the development of OMT-, SDL- and UML-based products, participated actively in the definition of SDL2000 (ITU), UML 1.4, and UML 2.0 (OMG).
He was involved in the deployment of Requirements Engineering for a whole aircraft program, and since then, in various other domains — industry, IT for banks or insurance companies…

• An “agile” lifecycle for requirements
• Is requirements engineering still needed in agile development approaches?

Brett Bicknell is an engineer at Critical Software Technologies and has played a key role in a number of formal methods initiatives, including the FP7 ADVANCE project. His software engineering experience encompasses varying levels of criticality and verification and validation activities. His previous work includes embedded systems, solutions for data acquisition and analysis, and a number of European-funded R&D ventures. He holds a BSc degree in Physics.

• Advance
• Rigorous Verification

Karim Kanso has worked within the field of formal methods and software engineering for many years, on various projects in the domains of transportation and aerospace. He has received a PhD in theoretical computer science, and is actively interested in the question of how requirement engineering can be applied to new disciplines, such as autonomous system engineering? He is currently working on the ADVANCE programme at Critical Software Technologies.

• Advance
• Rigorous Verification

Founder of the consulting company “Crescendo Technologies”, Joseph Aracic is a System Engineering Consultant, focusing on requirements management techniques and processes, product line engineering and model driven engineering.

Prior to this, Joseph has been the manager of the Telelogic (Now an IBM Rational brand) French Professional Services team for requirements management and architecture modeling. Joseph has been involved in various system engineering projects (mainly in the defense industry) as consultant/coach in system engineering techniques deployment.

• A key technique

Ariè Avnur is a veteran software developer, manager and executive, with over 40 years of experience developing software of various types, from real-time embedded and control systems through enterprise, web applications, to health IT systems. Ariè accompanied software engineering methodologies and requirements engineering since the 70’s, published papers and developed tools for the trade. Recently he was involved in the introduction and development of RE practice for Scrum projects in a major European healthcare company. Arie’s current interests include the application of RE and development methods for better software development, healthcare IT and Internet of Things platforms.

• A Finite State Machine Model for Requirements Engineering