Articles

Grigory Grin is a Chief Software Architect at Axinom – software supplier for Media- and In-Flight Entertainment solutions based in Germany and Estonia.
Grigory studied mathematics and graduated from the Ural State University in Russia in 1995. During his 25 years career on the software development field, Grigory had responsibilities in a broad range of roles – Development, Architecture, Business Analysis, Project Management. His main strengths are in alignment between the customer needs and contractors technical capabilities and solution portfolio to deliver the highest business value.
As a practitioner, Grigory has successfully led multiple multi-million euro projects for world-known brands in the aerospace industry with significant challenges on the field of Requirements Engineering.

• When the rubber hits the road

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests

Dr.-Ing. Birgit Demuth has over 20 years experience as researcher and educator in software engineering.
Amongst other lectures, she teaches students in requirements engineering.

Her interests are how to apply model-based techniques in the continuous software life cycle.
In a large-scale software project course, she coaches students and student tutors to elicit and model (often real)
user requirements before they start to implement.

• Tracing Change Requests

Albert Tort is the Research&Innovation Solutions Lead in Sogeti Spain. During the last years, he has been working as Quality Assurance and Software Control & Testing specialist in several projects for customers in different sectors (banking, airlines, insurance, procurement, etc.). Furthermore, he has been the lead of research&innovation projects developed at Sogeti. He was the winner of the “Capgemini-Sogeti Testing Innovation Awards 2015” for the submission of the best individual entry "Recover: Reverse Modeling and Up-To-Date Evolution of Functional Requirements in Alignment with Tests. He is also a member of the SogetiLabs community.

Previously, he served as a professor and researcher at the Services and Information Systems Engineering Department of the Universitat Politècnica de Catalunya-Barcelona Tech. As a member of the Information Modeling and Processing (MPI) research group, he focused his research on conceptual modeling, software engineering methodologies, OMG standards, knowledge management, requirements engineering, service science, semantic web and software quality assurance. Currently, he is also the coordinator of the postgraduate degree in Software Quality Assurance of the School of Professional & Executive Development of the Technical University Of Catalunya (BarcelonaTech).

He obtained his Computer Science degree in 2008 and he received his M.Sc. in Computing in 2009. In 2012 he presented the PhD thesis “Testing and Test-Driven Development of Conceptual Schemas”. He is the author of several publications in software engineering journals and conferences.

• KCycle: Knowledge-Based & Agile Software Quality Assurance
• The Recover Approach

Cristina Palomares is a PhD student in the Software Engineering for Information Systems Research Group (GESSI) at the Universitat Politècnica de Catalunya (UPC). Her PhD thesis deals about the construction, use and evolution of software requirement patterns for the reuse of requirements knoledge.

She has published several papers and presented posters and demos in requirements engineering conferences like in IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She is the coordinator of developers of the PABRE System for supporting requirements reuse.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Dr. Carme Quer is associate professor in the Service and Information System Engineering department (ESSI) at the Universitat Politècnica de Catalunya (UPC). She is member of the Software Engineering for Information Systems Research Group (GESSI) at the UPC. Her main research lines are requirements engineering and software quality.

She has published several papers in requirements engineering conferences like in the IEEE International Requirements Engineering Conference (RE) and the International Working Conference on Requirements Engineering: Foundation for Software Quality (REFSQ). She was General Chair of the Workshop on Requirements Engineering (WER) held in 2008.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Xavier Franch is Professor at the Universitat Politècnica de Barcelona (UPC-BarcelonaTech), Spain. He is Council Member and Full Member of the IREB association. He has published over 200 peer-reviewed papers in conferences and journals, many of them related to requirements engineering. He was Program Co-Chair of the RE’16 and REFSQ’11 conferences, and he belongs to the Editorial Board of the Requirements Engineering Journal (Springer) and Information Software and Technology (IST) journals, among others. He is coordinator of the Q-Rapids project and participates in the OpenReq project, both in the H2020 programme. He organizes workshops concerning requirements engineering for NLP4RE, CrowdRE, JIT-RE and others.

• What is the Relevance of Requirements Engineering Research to Practitioners?
• Requirements Reuse

Andreas Maier studied Computational Linguistics, Language Science and Technology and Philosophy at Saarland University in Saarbrücken, Germany. From November 2008 to April 2018, he worked as scientific assistant at Fraunhofer IESE, where he focused on the elicitation and the automatic analysis of user requirements provided in natural language. In May 2019, he finished his PhD in computer science, where he investigated difficulties in the identification and specification of hedonic quality in user requirements and developed possible solutions for the mitigation of these difficulties.

• ReqInspector

Simon Darting studied applied computer science with focus on communication at the University of Applied Sciences in Worms, Germany. Subsequent to his studies he started working as a researcher at Fraunhofer IESE in 2012, where he focused on requirements- and systems engineering within large-scale projects. In 2017 he completed his Master's degree in "Software Engineering for Embedded Systems" at the Technical University of Kaiserslautern, Germany. Since December 2018, he has been employed at BASF SE in Advanced Business Analytics with a focus on predictive maintenance.

• ReqInspector

Jens Schirpenbach has been working as a consultant in the area of Product Lifecycle management for more than 12 years focusing on operations transformation in the area of Engineering and Services. He worked as a solution architect and project manager for diverse projects, essentially in the automotive, aerospace and manufacturing industry. He managed a team for PLM at a major European consultancy. After eleven years in consulting he founded P&PM Solutions & Consulting.
He has a joint master degree in mechanical Engineering and business administration of the University of Darmstadt, Germany.

• Opportunities & Approaches

Dr. Michael Jastram is an expert model-based systems engineering (MBSE), with a focus on requirements. He has over 20 years experience in software development and requirements engineering, which he regularly shares as author and public speaker. Amongst other things, he publishes weekly updates on Systems Engineering Trends [German] and monthly updates on Requirements Engineering [English].

Michael is a leader in open source requirements management, being project lead of the Eclipse Requirements Modeling Framework. He is also a strong advocate of open standard and actively contributes to the OMG Requirements Interchange Format (ReqIF).

Today, he is founder and principal systems engineer of Formal Mind GmbH, a service provider in Open Systems Engineering.

You can connect digitally with Michael via his Blog [en] | Blog [de] | Twitter | LinkedIn | Xing.

• What is a Useful Perspective in Considering Requirements Engineering Relative to Systems Engineering?
• Modeling Requirements with Constraints
• Open Up

Pascal Roques is a senior consultant and trainer who has been modeling for more than twenty five years in various domains. He began with SADT and OMT, then moved to UML (OCUP Advanced Certification) and RUP in Valtech, where he was in charge of the Modeling part of the training catalog. Pascal is now working on his own at PRFC [www.prfc.fr], mainly in the field of Systems Modeling with SysML. He is also co-founder of SysML France association, and published several books on UML and SysML in French.

• Modeling Requirements with SysML

Martin Tate is an IT consultant who has now personally run or rescued 52 projects to select off-the-shelf solutions, interviewed over 725 people to capture the requirements for selections and appraised over 1,000 candidate solutions. A ‘poacher turned gamekeeper’, he formerly worked for an IT provider and was trained to sell software. BCS, The Chartered Institute for IT, made him a Chartered Fellow for eminence in evaluating software and recently published his book, a practitioner guide to procuring off-the-shelf IT.

• IT Requirements when Buying, not Making

Suzanne Robertson is having a stellar career in information technology and systems engineering. Suzanne is a pioneer in adapting ideas from other domains for automated solutions. She has collaborated in workshops using experts from fields as diverse as modern music, visualization, and cookery. Ideas from these domains were adapted to make major breakthroughs in creative ideas for domains ranging from air traffic control to local government. She is co-author of the best-selling Mastering the Requirements Process, among other books and courses. She is co-creator of the Volere requirements techniques. She was the founding editor of the Requirements Column in IEEE Software.

• Integrating Business Events into your Agile Framework
• How Will It Work?

As a principal and founder of The Atlantic Systems Guild, James Robertson is known for his work in implementing systems engineering principles that link business specialists with solution specialists. James is a consultant, lecturer, author, project leader whose area of concern is the requirements for software, and the contribution that good business analysis makes to successful projects. James is co-author of 5 books that have been influential in the business analysis world. His training as an architect has led to his work on good design principles and to his focus on how innovation can be integrated with business analysis.

• Integrating Business Events into your Agile Framework
• How Will It Work?

For more than twenty years, Rainer Grau has accompanied companies on their way enterprise agility. He supports companies in their efforts to continuously develop and create sustainable value for customers and employees. For him, it is particularly exciting to find out which methods, techniques and approaches are suitable for scaling agility and building the right product and the right service for the customer. Business analysis and requirements engineering are two essential disciplines in this context, which also generate high value in an agile setup - even if perhaps lived completely differently compared to a classic project approach.

Rainer's background of experience in business agility is based on his consulting work with companies from various industries. Stages of his professional life include Distinguished Consultant and Partner at Zühlke Engineering, Head of Business Development at digitec Galaxus, responsible for courses at universities of applied sciences on the topic of agility, founder of the Swiss Agile Leaders Circle, founder of Denkplan Verein and active involvement in communities around agility, business analysis and requirements engineering.

If there is still time left, Rainer Grau likes to spend it with his family, doing sports, playing his guitar and reading novels.

• Mission Possible
• Innovation Arena

Ravishankar is a consultant with Financial Services division of Capgemini Financial Services with an overall experience of 13 years in the Banking and Financial Service sector. He has managed million dollar projects for Global Banking and Insurance companies and has advised clients in areas of Financial Risk & Regulation, Data Management, Analytics, Product Development and day -to-day operations.
He is a certified in Financial Risk Management (FRM), Project Management (PMP) and Data Mining (University of California) .In his spare time he enjoys conducting classes in Project Management and Business Analysis.

• Evolving and Improving the Requirements Approach to Big Data Projects

Gildas PREMEL-CABIC works as a Business Analyst at Capgemini (France). Gildas holds the IREB CPRE foundation level certificate. His business domain is the use of simulation for Defence activities. His main domain of interest concerns system modeling and simulation.

• Discovering System Requirements through SysML

Priyank Arora is a Senior Business Analyst working in the digital IT space for 12+ years. He is a CBAP certified professional with a Core Credential in Business Analytics from Harvard Business School. He works on large scale digital transformation projects for the world’s leading travel group, where he helped to transition the requirement engineering processes from traditional to Agile working methodologies. He was also involved with a machine learning initiative within his organisation and is a data science enthusiast with an interest in applying analytical thinking and decision automation for business growth.

• Data Science – the expanding frontier for Business Analysts

Dr. Christof Ebert is managing director at Vector Consulting Services. He supports clients around the world to improve product strategy and product development and to manage organizational changes. A trusted advisor for companies around the world, member of industry boards, he lectures at the Universities of Stuttgart and at the Sorbonne in Paris. He authored several books including the popular “Systematic Requirements Engineering”. Contact him at christof.ebert@vector.com

• Cyber Security Requirements Engineering
• Product Management

Prof. Dr. Salinesi is an active academic who teaches topics in relation with software design such as Requirements Engineering, and Software Product Lines. He was involved in many funded research projects (FP4, FP5, H2020, ANR) and was the leader for collaborations and consultancy works for various companies such as France Télécom, SNCF, Renault, EDF or REXEL). He has been General Chair of SPLC, CAiSE, REFSQ international conferences, and was Organizing Chair of the 13th IEEE International Conference on Requirements Engineering.

At IREB, Prof Salinesi has acted for 2 mandates as Second Chair of the Executive Committee. He is now Full Member, member of the Editorial Board, and WG Member.

• Conversation with an Artificial Intelligence

Jason Hansen obtained a BS in Chemical Engineering from Michigan Tech. He left the work force in 2005 to focus on raising an adopted special needs daughter. In 2015, he decided to return to school and obtained his AAAS in Network Admin. He is working as a tutor at GRCC while pursuing a Master’s Degree in Computer Software Engineering at GVSU.

• Challenges in the elicitation and determination of precise requirements from animal stakeholders

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests
• Automated Quality Assurance

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation