Articles

Nuno Santos is currently a Senior Business Analyst at Natixis Portugal. He holds a PhD in Technologies and Information Systems, and is also certified from Agile Alliance as CSPO, and from the IIBA as CCBA, AAC and POA. He has also written articles about requirements, agility and product ownership at RE Magazine, BA Digest, Analyst Catalyst, Medium, and in several scientific conferences.

• Requirements Elicitation in Modern Product Discovery
• Inputs to requirements engineering in agile projects

Prof. Dr. Salinesi is an active academic who teaches topics in relation with software design such as Requirements Engineering, and Software Product Lines. He was involved in many funded research projects (FP4, FP5, H2020, ANR) and was the leader for collaborations and consultancy works for various companies such as France Télécom, SNCF, Renault, EDF or REXEL). He has been General Chair of SPLC, CAiSE, REFSQ international conferences, and was Organizing Chair of the 13th IEEE International Conference on Requirements Engineering.

At IREB, Prof Salinesi has acted for 2 mandates as Second Chair of the Executive Committee. He is now Full Member, member of the Editorial Board, and WG Member.

• Conversation with an Artificial Intelligence

For more than twenty years, Rainer Grau has accompanied companies on their way enterprise agility. He supports companies in their efforts to continuously develop and create sustainable value for customers and employees. For him, it is particularly exciting to find out which methods, techniques and approaches are suitable for scaling agility and building the right product and the right service for the customer. Business analysis and requirements engineering are two essential disciplines in this context, which also generate high value in an agile setup - even if perhaps lived completely differently compared to a classic project approach.

Rainer's background of experience in business agility is based on his consulting work with companies from various industries. Stages of his professional life include Distinguished Consultant and Partner at Zühlke Engineering, Head of Business Development at digitec Galaxus, responsible for courses at universities of applied sciences on the topic of agility, founder of the Swiss Agile Leaders Circle, founder of Denkplan Verein and active involvement in communities around agility, business analysis and requirements engineering.

If there is still time left, Rainer Grau likes to spend it with his family, doing sports, playing his guitar and reading novels.

• Mission Possible
• Innovation Arena

Gil Regev has been a researcher at EPFL since 1997 in the fields of enterprise information systems, requirements engineering, change management and knowledge management. Since 2008 he is also manager and consultant at Itecor, a boutique consultancy firm. Previously Gil developed software for computer peripherals at Logitech, in Switzerland and California.

• A General Systems Thinking Perspective on the CPRE

Alain Wegmann is a full professor at the School of Computer and Communication Sciences, EPFL, Switzerland. He worked 14 years for Logitech (Switzerland, Taiwan, US) in positions ranging from software developer, IS manager, manufacturing engineering to VP of engineering and OEM marketing before joining the EPFL in 1997. His teaching, consulting and research are in the fields of enterprise architecture, requirements engineering and service engineering.

• A General Systems Thinking Perspective on the CPRE

Olivier Hayard has been a consultant and in charge of IT and Knowledge Management at Itecor, a boutique consultancy firm, since 1993. Olivier’s main interests are business analysis and requirements management, as practitioner, trainer and researcher.

• A General Systems Thinking Perspective on the CPRE

Project manager since 2008, certified Scrum Product Owner, Agile Project Manager, with foundations of PRINCE2. Over six years of experience as a UX designer and researcher. Worked in digital agencies as a digital project manager, then switched to the client's side. Head of Product in iTaxi, then in Pergamin (e-signature). Worked also for libraries and museums in Poland to help improve the accessibility of digital products.

Awarded by Innovation Ad Award for the prototype for Sensodyne and by nomination in Mobile Trends for the mobile app for drivers. An author of articles about product management, user experience, and accessibility.

• The Potential of User Tests for Requirements Engineering

Rana Siadati is currently a PhD student in Software Requirements Engineering and also a visiting lecturer by the School of Computer Science at the University of Hertfordshire. Alongside these roles, Rana has many years of academic and industrial experience, also at managerial level, gained in the UK and abroad.

• Learning from history: The case of Software Requirements Engineering

Paul Wernick is a Senior Lecturer in Computer Science at the University of Hertfordshire. Dr Wernick has taken leading roles in the ProSim series of software process simulation workshops, and the IEEE Workshop on Software Evolvability. Dr Wernick’s current research interests cover the high-level human environment within which software processes occur and their simulation, and computer security.

• Learning from history: The case of Software Requirements Engineering

Vito Veneziano is a Senior Lecturer in Computer Science at the University of Hertfordshire, and his interests range from software engineering, HCI, requirements analysis and system modelling, to how software systems impact on organisations. Previously Dr Veneziano worked in IT and project management, business application development, software design and consultancy.

• Learning from history: The case of Software Requirements Engineering

Andreas Maier studied Computational Linguistics, Language Science and Technology and Philosophy at Saarland University in Saarbrücken, Germany. From November 2008 to April 2018, he worked as scientific assistant at Fraunhofer IESE, where he focused on the elicitation and the automatic analysis of user requirements provided in natural language. In May 2019, he finished his PhD in computer science, where he investigated difficulties in the identification and specification of hedonic quality in user requirements and developed possible solutions for the mitigation of these difficulties.

• ReqInspector

Simon Darting studied applied computer science with focus on communication at the University of Applied Sciences in Worms, Germany. Subsequent to his studies he started working as a researcher at Fraunhofer IESE in 2012, where he focused on requirements- and systems engineering within large-scale projects. In 2017 he completed his Master's degree in "Software Engineering for Embedded Systems" at the Technical University of Kaiserslautern, Germany. Since December 2018, he has been employed at BASF SE in Advanced Business Analytics with a focus on predictive maintenance.

• ReqInspector

Priyank Arora is a Senior Business Analyst working in the digital IT space for 12+ years. He is a CBAP certified professional with a Core Credential in Business Analytics from Harvard Business School. He works on large scale digital transformation projects for the world’s leading travel group, where he helped to transition the requirement engineering processes from traditional to Agile working methodologies. He was also involved with a machine learning initiative within his organisation and is a data science enthusiast with an interest in applying analytical thinking and decision automation for business growth.

• Data Science – the expanding frontier for Business Analysts

Grigory Grin is a Chief Software Architect at Axinom – software supplier for Media- and In-Flight Entertainment solutions based in Germany and Estonia.
Grigory studied mathematics and graduated from the Ural State University in Russia in 1995. During his 25 years career on the software development field, Grigory had responsibilities in a broad range of roles – Development, Architecture, Business Analysis, Project Management. His main strengths are in alignment between the customer needs and contractors technical capabilities and solution portfolio to deliver the highest business value.
As a practitioner, Grigory has successfully led multiple multi-million euro projects for world-known brands in the aerospace industry with significant challenges on the field of Requirements Engineering.

• When the rubber hits the road

Jason Hansen obtained a BS in Chemical Engineering from Michigan Tech. He left the work force in 2005 to focus on raising an adopted special needs daughter. In 2015, he decided to return to school and obtained his AAAS in Network Admin. He is working as a tutor at GRCC while pursuing a Master’s Degree in Computer Software Engineering at GVSU.

• Challenges in the elicitation and determination of precise requirements from animal stakeholders

Guilherme Siqueira Simões works on FATTO Software Consulting (www.fattocs.com). He is author of a book on Function Points and of another book on Requirements Engineering, and has trained thousands of people from Latin America on these subjects. He has more than 20 years of experience on software projects. He is graduated on computer science and business management. He is a certified professional on function points by IFPUG and COSMIC, requirements engineering by IREB and PMP by PMI.

• Functional Requirements and their levels of granularity

He has been a function point analysis user since 1991, instructor since 1993, certified function points specialists (CFPS) by IFPUG since 1996 and by COSMIC since 2012. In both certifications, was among the first Brazilians to hold them. In 2001, co-authored the book “APF: Medição, Estimativas e Gerenciamento de Projetos de Software”, currently in its 13th edition, with over 13,000 copies sold and the main reference book on the subject in Brazil. In 2016 coauthored the book "RE: Software Orientado ao Negocio” and became a certified professional for requirements engineering – foundation level – by the IREB.

• Functional Requirements and their levels of granularity

Bastian Tenbergen is an Assistant Professor for Computer Science at the State University of New York at Oswego. He has co-authored articles and contributed to several books in the area of Software Engineering. Bastian’s main research focus is on Model-Based Requirements Engineering, Context Analysis, and Safety of Embedded and Cyber-Physical Systems. He has many years of project and consulting experience and has worked closely with industry.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Vogelsang is a post-doc researcher in the software & systems engineering group at the Technical University of Munich. He works on model-based requirements engineering and participated in several research collaborations with industrial partners especially from the automotive industry. His research published was published in relevant international conferences like RE, REFSQ, or ICSE.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Thorsten Weyer is a research group leader at the University of Duisburg-Essen. He has been a member of organization committees, program committees and reviewer for scientific conferences and journals. Thorsten gives regular lectures at the University and is an experienced conference speaker. He has also held several leading positions in research projects and technology transfer projects. He is member of the IREB council and head of the IREB working group Requirements Modeling.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Andreas Froese works as a research assistant in the working group Software Systems Engineering (Prof. Dr. Klaus Pohl) at the University of Duisburg-Essen. He worked in several research projects where he was able to expand his knowledge in the domain of Requirements Engineering for software-intensive Embedded Systems, as well as in those of model-based Context Analysis and context-based Quality Assurance.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Jan Christoph Wehrstedt works as a mathematician at the Technology Field Automation & Control at Siemens Corporate Technology. Currently he is Senior Key Expert for Efficient Simulation Driven System Development. He is the project manager of several business (Siemens internal) and public funded projects dealing with the integration of simulation and modeling approaches towards a simulation based engineering of technical systems and plants and it’s embedding into PLM lifecycle and tools.

• Modeling Requirements and Context as a means for Automated Requirements Validation

Veronika Brandstetter is a mathematician in the Technology Field Automation & Control at Siemens Corporate Technology. She is developing methods for seamless engineering and improved operation of technical systems based on simulation. Recently, she focused on simulation based design for manufacturing technologies. She has been working in various Siemens internal research projects as well as in publicly funded projects also managing part of them in different groups within the Technology Field.

• Modeling Requirements and Context as a means for Automated Requirements Validation

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

Eduard C. Groen is engineering psychologist. His fascination with the rapid rise of man-machine interfaces and other changes that affect society inspires him to contribute with technologies that optimally make use of the potential that these developments bring. As Fraunhofer IESE operates at the intersection of science and industry, he is involved in a variety of projects, while leading the development of the “Crowd-based Requirements Engineering” approach.

• How Requirements Engineering can benefit from crowds

Matthias Koch studied computer science with a focus on software engineering. Since 2012, he is employed as engineer at Fraunhofer IESE and mainly addresses the topics of requirements engineering and business analysis. In this context, he was involved in research projects on the pre-project and requirements definition phase, case studies and product evaluations. In research as well as industry projects, he regularly acts as requirements responsible, conducts workshops with customers and provides consulting.

• How Requirements Engineering can benefit from crowds

Martin Tate is an IT consultant who has now personally run or rescued 52 projects to select off-the-shelf solutions, interviewed over 725 people to capture the requirements for selections and appraised over 1,000 candidate solutions. A ‘poacher turned gamekeeper’, he formerly worked for an IT provider and was trained to sell software. BCS, The Chartered Institute for IT, made him a Chartered Fellow for eminence in evaluating software and recently published his book, a practitioner guide to procuring off-the-shelf IT.

• IT Requirements when Buying, not Making

Christoph Wolf works for more than 15 years as Requirements Engineer, Business Analyst, Project Manager and Quality Assurance Manager. He has built up a Business Analysis team and led it for several years. Since last year, he is consultant at SwissQ and supports clients in requirements engineering and quality assurance with focus on delivering business value. 

• The Business Analysis Center of Excellence

Stefan Meier is passionate about exploring and experimenting with new Requirements Engineering practices and methodologies. He many years of practical experience as Project Manager, Requirements Engineer  and Agile Coach. He loves talking to different stakeholders and sharpening their ideas and visions to get a crisp and clear understanding of their needs and values. 
He works at SPF Consulting and currently helps customers switching their requirements frameworks from waterfall processes towards agile approaches like Scrum. Additionally he is an conversant trainer for IREB CPRE FL, Visual Facilitation and Agile Requirements.

• Applying IREB RE practices in an agile environment

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

After studying physics in Germany and New Zealand, Gunnar Harde worked as software engineer, later as IT consultant and project manager for IT and business consultancies and research institutes. Since 2007 he is responsible for the development of several IT systems of the Group Quality Assurance at Volkswagen and shapes the cooperation between IT and business department strategically and methodically. Harde is Certified Scrum Product Owner and expert in agile management.

• Managing the Invisible
• Agility and Obligation
• Agility and Obligation

Johan Zandhuis is Product manager at SYSQA BV, an organisation specialised in quality assurance in IT. The themes ‘creating value with IT’ and ‘getting grip on IT’ play a constant role when he’s doing the job. “Why are we doing this” is a question he likes to ask. Besides other publications Johan is co-author of the Dutch book ‘Grip op requirements’ based on the IREB syllabus. Also he is one of the initiators for the Dutch translation of the IREB-dictionary and the IREB foundation syllabus. Contact: jzandhuis@sysqa.nl

• Poor requirements?

Brett Bicknell is an engineer at Critical Software Technologies and has played a key role in a number of formal methods initiatives, including the FP7 ADVANCE project. His software engineering experience encompasses varying levels of criticality and verification and validation activities. His previous work includes embedded systems, solutions for data acquisition and analysis, and a number of European-funded R&D ventures. He holds a BSc degree in Physics.

• Advance
• Rigorous Verification

Karim Kanso has worked within the field of formal methods and software engineering for many years, on various projects in the domains of transportation and aerospace. He has received a PhD in theoretical computer science, and is actively interested in the question of how requirement engineering can be applied to new disciplines, such as autonomous system engineering? He is currently working on the ADVANCE programme at Critical Software Technologies.

• Advance
• Rigorous Verification

Brett Bicknell is an engineer at Critical Software Technologies and has played a key role in a number of formal methods initiatives, including the FP7 ADVANCE project. His software engineering experience encompasses varying levels of criticality and verification and validation activities. His previous work includes embedded systems, solutions for data acquisition and analysis, and a number of European-funded R&D ventures. He holds a BSc degree in Physics.

• Rigorous Verification

Karim Kanso has worked within the field of formal methods and software engineering for many years, on various projects in the domains of transportation and aerospace. He has received a PhD in theoretical computer science, and is actively interested in the question of how requirement engineering can be applied to new disciplines, such as autonomous system engineering? He is currently working on the ADVANCE programme at Critical Software Technologies.

• Rigorous Verification

Daniel McLeod has worked on a variety of imaging sensor systems in the Airborne, Land and Naval domains. His previous work includes algorithm development, system design, requirements analysis and verification and project management. He is currently working within the smart energy domain on a Low Voltage monitoring system and a system for automated control of low voltage transformers in response to customer demand and distributed generation.

• Rigorous Verification

Dr. Christof Ebert is managing director at Vector Consulting Services. He supports clients around the world to improve product strategy and product development and to manage organizational changes. A trusted advisor for companies around the world, member of industry boards, he lectures at the Universities of Stuttgart and at the Sorbonne in Paris. He authored several books including the popular “Systematic Requirements Engineering”. Contact him at christof.ebert@vector.com

• Cyber Security Requirements Engineering
• Product Management

Harry M. Sneed has a Master’s Degree in Information Sciences from the University of Maryland, 1969. He has been working in the IT field since 1967 when he started as a FORTRAN programmer for the US Navy Department. He migrated to Germany in 1971 and worked first for the Federal University Administration and then for Siemens in the database area. In 1978 he set up the first commercial software test laboratory in Budapest. There he developed the first German requirements engineering tool SoftSpec in 1982. That tool was used to document the requirements in many large German organizations, including BMW, Bertelsmann, Thyssen Steel and the German Railways. That tool was used not only to collect and store the requirements on the mainframe, but also to check the completeness and consistency of the requirements, as well as to generate a system design.

At the end of the 1980’s Sneed moved over to the field of reverse and reengineering and became involved in projects throughout Europe. In 2009 he received the Stevens Award from the IEEE Computer Society for his pioneering achievements in that field. He conducts courses at two technical colleges and two universities. He has published over 400 technical articles and written 23 books on the subjects of software testing, maintenance, migration and measurement. His work in requirement engineering is mainly in connection with reverse engineering, change management and test, three areas in which he still works as freelance consultant.

• Tracing Change Requests
• Automated Quality Assurance

Dr. Ralph R. Young (CSEP, http://www.ralphyoung.net) has invested his career in assisting individuals, projects, and organizations to improve and helping others to grow. He has a wide diversity of experience, including private sector, Federal Government, local government, military, and oversight of programs. He consults and speaks frequently concerning project management, requirements development and management, and process improvement. Ralph has written a series of five books to date: Effective Requirements Practices (that describes what to do); The Requirements Engineering Handbook (that describes how to perform requirements-related work); Project Requirements: A Guide to Best Practices (which is written for program and project managers, to communicate the importance and value of incorporating good requirements practices); Performance-Based Earned Value (with Paul Solomon), which proposes a change to industry earned value management practices; and How to Save a Failing Project: Chaos to Control (with Steve Brady and Dennis Nagle) that provides guidance and insight based on multiple efforts in changing the direction of failing projects and also for projects that desire to perform well.. Ralph contributed to another book, The 77 Sins of Project Management, written by a large number of contributors selected by the publisher, that describes sins, danger signs, suggested solutions, and tips for 77 aspects of project management – thoughtful, considered advice. Ralph enjoys the outdoors, boating, reading, writing, and family activities, especially six grandchildren. He wants to write another book, concerning leadership. He resides on Kent Island, Maryland USA. He welcomes comments and feedback and can be reached at ryoungrr@aol.com.

• Toward Better RE

Alexander Rachmann advises companies on the linking business and IT. His strong interdisciplinary knowledge of business administration and computer science enables him to work as an ideal Requirements Engineer, Business Analyst, or System Analyst. He has worked in industries such as e-commerce, healthcare, IT security, and software development. He holds a doctorate degree in economics, master's degrees in computer science and information science and a diploma in business computer science.

• Product Owner in Scrum

Jesko Schneider worked as a consultant with a focus on Business Analysis, Requirements Management and Usability Engineering. He built up consulting services for Requirements Engineering and Usability Engineering in an international consulting company. His industry focus lies on telecommunications. He is a well-known trainer for Certified Professional for Requirements Engineering from the IREB. In his role as Requirements Engineer, Business Analyst, System Analyst or Product Owner, he is always the linkage between business and IT. He holds a degree in media informatics.

• Product Owner in Scrum

Frank Engel looks back on over 10 years’ experience in project management and Requirements Engineering. Prior to his time as a Partner of the Anforderungsfabrik, he was responsible for an international consulting company as Unit Manager. Topic of his business unit was Requirements Engineering and Management. His role in projects is Product Owner, Project Manager and Requirements Engineer. He studied business information systems. Always linking business and IT!

• Product Owner in Scrum

Founder of the consulting company “Crescendo Technologies”, Joseph Aracic is a System Engineering Consultant, focusing on requirements management techniques and processes, product line engineering and model driven engineering.

Prior to this, Joseph has been the manager of the Telelogic (Now an IBM Rational brand) French Professional Services team for requirements management and architecture modeling. Joseph has been involved in various system engineering projects (mainly in the defense industry) as consultant/coach in system engineering techniques deployment.

• A key technique

For more than twenty years, Rainer Grau has accompanied companies on their way enterprise agility. He supports companies in their efforts to continuously develop and create sustainable value for customers and employees. For him, it is particularly exciting to find out which methods, techniques and approaches are suitable for scaling agility and building the right product and the right service for the customer. Business analysis and requirements engineering are two essential disciplines in this context, which also generate high value in an agile setup - even if perhaps lived completely differently compared to a classic project approach.

Rainer's background of experience in business agility is based on his consulting work with companies from various industries. Stages of his professional life include Distinguished Consultant and Partner at Zühlke Engineering, Head of Business Development at digitec Galaxus, responsible for courses at universities of applied sciences on the topic of agility, founder of the Swiss Agile Leaders Circle, founder of Denkplan Verein and active involvement in communities around agility, business analysis and requirements engineering.

If there is still time left, Rainer Grau likes to spend it with his family, doing sports, playing his guitar and reading novels.

• Mission Possible
• Innovation Arena